Lenovo BladeCenter Virtual Fabric 10Gb Switch Module Product Manual - Page 7

Browse online or download pdf Product Manual for Switch Lenovo BladeCenter Virtual Fabric 10Gb Switch Module. Lenovo BladeCenter Virtual Fabric 10Gb Switch Module 17 pages. Switch module
Also for Lenovo BladeCenter Virtual Fabric 10Gb Switch Module: User Manual (20 pages)

Lenovo BladeCenter Virtual Fabric 10Gb Switch Module Product Manual
Stacking
Up to eight switches in a stack; single IP management
FCoE support
FCoE LAG on external ports
802.1Qbg support
vNIC and UFP support
Manageability
Simple Network Management Protocol (SNMP, V1, V2, and V3)
HTTP/HTTPS browser GUI
Industry-standard CLI or menu-driven CLI
Telnet interface for CLI
SSH V2
Serial interface for CLI
Scriptable CLI
Firmware image update (TFTP and FTP)
Network Time Protocol (NTP) for switch clock synchronization
Switch Center support
Monitoring
Switch LEDs for external port status and switch module status indication
Port mirroring for analyzing network traffic passing through switch
Change tracking and remote logging with syslog feature
Support for sFLOW agent for monitoring traffic in data networks (separate sFLOW analyzer
required elsewhere)
POST diagnostics
Special functions
Serial over LAN (SOL)
The following features are not supported with IPv6:
Default switch management IP address
SNMP trap host destination IP address
Bootstrap Protocol (BOOTP) and DHCP
RADIUS, TACACS+ and LDAP
QoS metering and re-marking ACLs for out-profile traffic
VMware Virtual Center (vCenter) for VMready
Routing Information Protocol (RIP)
Internet Group Management Protocol (IGMP)
Border Gateway Protocol (BGP)
Virtual Router Redundancy Protocol (VRRP)
sFLOW
The following features are not supported with Stacking (for more information about limitations, see the
Networking OS Application Guide):
IGMP Relay and IGMPv3
IPv6
Routing protocols (RIP, OSPF, BGP)
sFLOW
Static MAC addresses
Virtual Router Redundancy Protocol (VRRP)
BladeCenter Virtual Fabric 10Gb Switch Module (withdrawn product)
7