CTS CVT-RACK-16S User Manual - Page 2

Browse online or download pdf User Manual for Chassis CTS CVT-RACK-16S. CTS CVT-RACK-16S 2 pages. 16-slot universal media converter chassis

Print Page
CVT-RACK-16S
16-Slot Universal
Media Converter Chassis
User's Guide
Version 2.0
2. Installation
(Refer to the back page)
2.1 Rack Mounting
CVT-RACK-16S can be mounted in a standard EIA 19-
inch rack. Begin by aligning the mounting brackets along
the sides of the unit with the slit over the holes. Secure
the screws tightly to fit the brackets to the device before
fixing it into the 19-inch rack. Please ensure that the
ventilation holes are not obstructed. The step-by-step
procedure is shown on the next page.
2.2 Media Converter
1.Screw the upper and lower sliders on media converter.
2.Carefully align the slider with slide way, then press it
with firm and steady pressure.
2.3 Cabling
1. The correct cab le specifications and distances will be
listed on the media converter's documentation.
2. Connect the RJ-45/fiber cable to the front of media
converter.
2.4 Powering
1.Connect the female end of the power cord to the MCR.
2.Connect the m ale end of the power cord to an
external AC outlet.
3.The power LED on CVT-RACK-16S will illuminate
when the installation is done correctly.
4.Similarly, the power indicator LED on the media converter
will also illuminate when the installation is complete and
correct.
Trademarks
Copyright
Connection
Technology
Contents subject to revision without prior notice. CTS is
a registered trade mark of Connection Technology
Systems Inc..
Other trademarks remain the property of their owners.
Copyright Statement
This publication may not be reproduced as a whole or in
part, in any way whatsoever unless prior consent has
been obtained from Connection Technology Systems Inc.
FCC Warning
CVT-RACK-16S has been tested and certified as within
Class A digital specifications under Part 15 of FCC Rules.
These standards are designed to provide reasonable
protection from harmful interference when these units are
used in a commercial environment. These devices can
use, generate and radiate radio frequency energy and
may cause harmful interface to radio communications
unless installed in accordance with the instructions in this
User's Guide. Operation of this device in a residential
area is likely to cause harmful interference which will
make the user responsible for the appropriate remedial
action at his/her expense.
CE Mark Warning
CVT-RACK-16S is a Class A product. In some domestic
environments, it may cause radio interface in which case
the user will need to consider adequate preventative
measures.
3. Specifications
Slot number
16 slots
LED
Power
Power
-Internal AC Power Module
Input Voltage: 100 ~ 240VAC, 3.0A, 50/60Hz
Output Voltage: 5VDC
-Power Consumption: 9.5W (Empty Loading)
Typical Operation & Storage Temperature
Operation: 0 ~ 50°C
Storage Temperature: -20 ~ 60°C
Humidity: 5% ~ 90% non-condensing
Dimension and Weight
Size: 440 x 280 x 90mm (W x D x H)
Weight: 6.65KG (The Chassis Only)
Emission/Safety:
EMI: FCC Class A, CE
1. Introduction
Systems
Inc.
The CTS (Connection Technology Systems)
Media Converter Chassis, CVT-RACK-16S is
designed to accommodate sixteen separate and
independent CTS media converters within a
rack-mountable rack.
CVT-RACK-16S
swappable fans for enhanced reliability. The
benefit is that if one fan fails then it can be
replaced with another one without taking back
whole CVT-RACK-16S.
Power status is shown on the LED display for
the user to monitor and respond as necessary.
For optimal performance, please ensure that
CVT-RACK-16S is placed in a well-ventilated
position, enabling air to circulate above and
below the unit.
CVT-RACK-16S can also be installed in a
standard 19-inch site rack; provision has been
made for the appropriate connecting brackets.
Note: This Chassis has been designed to house
only the proprietary range of media converters.
Any other configuration is at the user´s own risk.
Order Information
CVT-RACK-16S
16-Slot Universal Media Converter Center
Strongly Recommended:
To ensure the best performance of standalone
media converters, please keep your environment
temperature under 40 degrees Celsius.
Contact Information
Connection Technology Systems INC (CTS)
18F-6, No.79, Sec.1, Xintai 5th Rd., Xizhi Dist.,
New Taipei City 221, TAIWAN, R.O.C.
T EL: +886 2 26989661 FAX: +886 2 26989662
is
fitted
with
three
hot-