Nikon Capture NX-D Reference Manual - Page 37

Browse online or download pdf Reference Manual for Digital Camera Nikon Capture NX-D. Nikon Capture NX-D 45 pages.

Print Page
Nikon Capture NX-D Reference Manual
Introduction
Viewing Pictures

Batch Processing

The File > Run Batch Process option can be used to perform the same image
adjustments on all pictures in a selected folder and then export the processed
images in a selected file format. Batch processing options are shown below.
q
w
r
y
i
o
Source folder: Click Browse to choose a source folder. To include all images in
q
sub-folders under the selected folder, select Include subfolders.
Adjustments: Select Apply current adjustments to process the images using
w
the adjustments for the current image. To apply adjustments previously
saved from the adjustment manager, choose Adjustments to apply and click
Change adjustments to choose an adjustments file. To export the images in
the selected folder in another format without changing the settings currently
selected for each image, choose Apply adjustments already in files.
File format: Select the format in which the processed files will be saved. Choose
e
from JPEG, TIFF 8 bit, and TIFF 16 bit.
Capture NX-D Reference Manual
Filters
Image Adjustment
r
t
y
u
e
i
t
u
o
Other Features
Quality (JPEG only): Use the slider or pull-down menu to choose a value between
0 and 100. The higher the value, the lower the compression ratio and the
higher the image quality; the lower the value, the higher the compression
ratio and the smaller the file size.
Use LZW compression(TIFF only): Compress TIFF files using "lossless" LZW compres-
sion.
LZW compression may sometimes increase file size when applied to 16‑bit images.
D
A
Resolution: Select this option to choose the output resolution.
Embed ICC profile: Select this option to embed the current color profile in each
image.
Specify size: Select this option to resize pictures saved in the new format. The
new size can be entered in pixels, centimeters, or inches. When you enter a
value for either Long edge or Short edge, the remaining value will automati-
cally be adjusted to maintain the original aspect ratio.
Destination: Select Use source folder to save the processed files to the current
folder. To choose a different folder, remove the check from this option and
click Browse. To save the processed files under the same names as the origi-
nals, select Use source file name (if a file with the same name and extension
already exists in the current folder, the processed file will be renamed by add-
ing a number to the file name); to choose different names, remove the check
from this option and click Edit.
Menu Guide
37