Nikon COOLPIX 4500 Mounting Instructions

Browse online or download pdf Mounting Instructions for Digital Camera Nikon COOLPIX 4500. Nikon COOLPIX 4500 2 pages. Mounting a coolpix 4500 onto a microscope
Also for Nikon COOLPIX 4500: Pocket Manual (16 pages)

Print Page

Mounting a Coolpix 4500 onto a Microscope Reference Sheet

Please refer to the Coolpix 4500 User's Manual for page numbers indicated below.

Mounting the Coolpix 4500 to a microscope trinocular photo tube or beamsplitter

1. With the camera power off, open the card-slot cover and make sure

a CompactFlash

See p.12

the camera.

2. Carefully thread the MDC-A Relay Lens onto the camera's lens.

Likewise, thread the C-mount onto the MDC-Relay Lens securely.

Note that over-tightening the adapter may damage threads of both

adapter and apparatus.

3. Attach the C-mount adapter onto the microscope's trinocular or

beamsplitter port. Secure the C-mount into place.

4. Swivel the LCD screen to the desired viewing position and angle.

Note: The EH-52 AC Adapter is recommended to eliminate battery consumption.

Mounting the Coolpix 4500 into a microscope eyepiece tube

1. With the camera power off, open the card-slot cover and make sure

a CompactFlash

See p.12

the camera.

2. Remove the cover ring from the relay lens by loosening the three

setscrews.

3. Attach the MDC-A relay lens to the camera lens.

Note that over-tightening the adapter may damage threads of both

adapter and apparatus.

4. Remove an eyepiece from the microscope and insert the MDC-A

adapter as replacement.

5. Swivel the LCD screen to the desired viewing position and angle.

Note: The EH-52 AC Adapter is recommended to eliminate battery consumption.

This reference sheet is to be used in addition to the Coolpix 4500 User's Manual

Card or IBM Microdrive

is properly inserted into

MDC- A Relay Lens

C-Mount

Photo Tube

Cover Ring

Setscrew (x3)