Nikon DS-Qi1Mc Instructions Manual - Page 43
Browse online or download pdf Instructions Manual for Camera Accessories Nikon DS-Qi1Mc. Nikon DS-Qi1Mc 49 pages. Ds camera control unit/camera heads
Also for Nikon DS-Qi1Mc: Instructions Manual (49 pages)
Print Page
Camera Settings on the PC
4
Trouble
Unable to control
camera functions. (Or
incorrect settings
result.)
Noise is heard from the
Camera Head (DS-Ri1)
Adjusting the white
balance gain setting
seems to have no
effect on the image.
Chapter 8
Troubleshooting
4
Camera Settings on the PC
• Check that the specified device driver is installed on the PC.
The specified device driver can be found on the supplied CD-ROM.
• Check that the application software in use is compatible with the DS-U3.
• Check that the DS-U3 and the PC are connected with the IEEE1394b
cable.
• Check that the cable used is IEEE1394-compliant. For shielded twisted
pair cables, the cable connecting devices must be 4.5 m maximum.
• Check that the version of the OS is appropriate for the product. The
product is not compatible with the Macintosh.
Applicable OS: Windows 7 Professional, Windows XP Professional
Service Pack 2 (SP2)
• If you obtain a high-resolution image by pixel-shifting on DS-Ri1, noise
may be heard from the movable part of the Camera Head. However, this
is not a problem.
• If you are using the GainUp mode (X 16) for DS-Ri1, be sure that the
white balance gain is set to below 4. Setting the parameter to 4 or higher
is invalid due to the hardware limitation.
- 35 -
Checkpoints