Nikon Nivo Series Instruction Manual - Page 29
Browse online or download pdf Instruction Manual for Camera Accessories Nikon Nivo Series. Nikon Nivo Series 32 pages. Hardware
Also for Nikon Nivo Series: Communication Interface Manual (34 pages)
Print Page
Setting the Measurement Mode and Preparing the Target
The Nivo series has two measurement modes: Prism mode (
Reflectorless mode (
down the
To set the measurement mode depending on the target you want to measure, see the
following table.
Target
Prism, reflector sheet
Other (reflective materials)
In some cases, you can measure another target that is not appropriate to the set
measurement mode.
Note – The Nivo
function, and Laser Class 1 in the Prism mode.
Don
t sight the Prism when the Laser Pointer is on.
'
Note – Nivo
and Laser Class 2 in Laser pointer function.
Measurement with a prism
Do not use a prism with scratches, a dirty surface, or a chipped center. Prisms with
thin edges are recommended.
✓
As the Nivo series is extremely sensitive, multiple reflections on the prism surface
can sometimes cause a significant loss in accuracy.
To maintain the accuracy of your measurements:
N-Prism
[MSR1]
[MSR2]
or
key for one second.
2.C
is Laser Class 3R in the Reflectorless mode and Laser pointer
3.C
5.C
and Nivo
are Laser Class 1 in the Prism and Reflectorless mode,
✕
chipped center
thin edges
). These modes can be changed at any time by holding
Target setting
Prism (Prism mode)
N-Prism (Reflectorless mode)
✕
thick edges
Total Station Nivo Series Instruction Manual
Preparation 2
Prism
) and
1 7