Nikon WT-4 User Manual - Page 20
Browse online or download pdf User Manual for Camera Accessories Nikon WT-4. Nikon WT-4 25 pages. Configuring the wt-4 for upload to a computer (ad-hoc mode)
Also for Nikon WT-4: Basic Instructions (14 pages)
Print Page
$00_WT-4_En.book Page 9 Friday, August 10, 2007 2:02 PM
3
Close the battery-chamber
A
Removing the Battery
Being careful not to drop the battery, open the
battery chamber cover and remove the battery as
shown at right.
A
Stand-By Mode
Reduce the drain on the battery by selecting [Auto Power Off ] (pg.173) in
the Menu Guide and set the time delay until the WT-4 automatically turns
Off after the USB connection between the camera and the WT-4 is
terminated. However, the camera will not enter stand-by mode while the
camera is transmitting to computer in Thumbnail select mode (pg.79).
A
Battery Level
The level of the battery inserted in the WT-4 can be determined by
connecting the WT-4 to the camera (pg.70, 81, 90, 102, 140) and checking
the battery level
menu.
A
The EH-6 AC Adapter
The optional EH-6 AC adapter can also be used to
power the camera when the WT-4 is connected.
Connect the DC plug on the AC adapter to the
WT-4 DC-IN connector, not to the camera.
cover.
in the [Battery info] (pg.172)
menu in the camera setup
Introduction
9