Nikon Prostaff 1000i Instruction Manual - Page 21

Browse online or download pdf Instruction Manual for Measuring Instruments Nikon Prostaff 1000i. Nikon Prostaff 1000i 27 pages.

Print Page

Single measurement

Pressing the PWR button once starts single measurement, then displays the results.

• If measurement fails, measurement continues automatically for up to about 4 seconds until results are

obtained. Measurement stops when it is successful, even within about 4 seconds.

Continuous measurement

Press and hold down the PWR button to start continuous measurement up to approx. 8 seconds. During

measurement, the measured result is displayed consecutively while the laser irradiation mark is blinking. If

you release your finger from the button, continuous measurement stops.

Standby

* If measurement fails, measurement continues automatically for up to about 4 seconds until results are obtained.

Example of measured

distance display

Press the PWR button once

Press and hold down the PWR

button

Example of measurement

failure

Single measurement*