Clas Ohlson 38-8124 Instruction Manual
Browse online or download pdf Instruction Manual for Battery Charger Clas Ohlson 38-8124. Clas Ohlson 38-8124 5 pages. 6-port usb charging station
Print Page
6-Port USB Charging Station
Art.no 18-8497, 38-8124
Model AC27C00
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
•
Do not open the housing. Certain unshielded components
inside the housing carry dangerous voltages. The presence
of dangerous voltage across certain uninsulated
components within the housing constitutes the risk of
electric shock.
•
The product should not be taken apart or modified.
•
Never use the product if it has been damaged in any way.
•
Do not use the product with devices which require
a charging current of more than 2400 mA.
•
The product is intended for indoor use only.
•
Do not place the product where there is a risk of it falling
into water or other liquid.
•
Only charge devices with rechargeable batteries, NEVER
attempt to recharge any other types of batteries.
•
Always switch off any device before connecting it to
the product.
•
The USB charger should be disconnected from the power
supply by unplugging it from the electrical socket, which
must also be easily accessible.
Product description
•
Charging station for charging iPhones, iPads, Android
telephones and most e-book readers.
•
Automatically recognises which type of device is connected
in order to optimise the charging.
•
Protects against overcurrent and short-circuiting.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
1
2
1. USB port: 5 V/2.4 A per port (max 12 A in total)
2. LED indicator (power)
3. 1.5 m mains lead
Charging
1. Check that the charging current of the device that you wish
to charge does not exceed the maximum current output of
the charging station. Refer to the instruction manual of your
device for further clarification if you are unsure.
2. Connect the device to be charged to one of the USB ports
using a USB cable.
3. Plug the mains lead into a wall socket. The LED indicator
will come on.
Care and maintenance
•
Always unplug the charging station before cleaning it.
Only use a soft dry cloth to wipe the exterior of the charger,
clean if required.
•
Unplug the mains lead from the wall socket and store
the charging station in a dry, dust-free environment out
of the reach of children whenever it is not to be used for
an extended period.
Troubleshooting guide
The device
•
Check that the USB cable connecting
does not
the device to the charging station is intact
charge.
and properly connected.
•
Is the wall socket live? Is the LED power
indicator on?
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order
3
to prevent any harm to the environment or
health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Input voltage
Output voltage 5 V
Output current
Size
100–240 V
6 × 2.4 A (max 12 A in total)
102 × 70 × 29 mm