Cub Cadet 182 Operator's Manual - Page 15

Browse online or download pdf Operator's Manual for Lawn Mower Cub Cadet 182. Cub Cadet 182 20 pages. 9-inch 3-n-1 electric lawn mower
Also for Cub Cadet 182: Operator's Manual (20 pages)

Print Page

If the overload protection switch pops out shortly after resetting:

Release the motor/blade control handle and do NOT re-

start the mower for at least 15 minutes to allow the electric

motor extra time to cool.

Press the overload protection switch inward to reset.

Restart unit.

NOTE: If the overload protection switch pops out

repeatedly during operation or will not remain in when

attempting to reset, contact your Authorized Service

Center to arrange for repair.

Replacing Trail Shield

WARNING:

Never operate mower unless the trail

shield is in place and working. Never operate mower

with damaged safety devices. Failure to do so, can

result in personal injury.

The trail shield is subject to wear and damage which could

expose moving parts or allow objects to be thrown. For safety

protection, frequently check the trail shield and replace

immediately with original equipment manufacturer's (OEM) part

only, listed in this manual.

To remove trail shield, lift rear door, and press shield in on

either side to remove from hole. See Fig. 6-3.

Figure 6-3

Remove shield from opposite hole and replace with new

shield in the opposite order and manner of removal.

6 — M

& a

ectiOn

aintenance

djustMents