Dirt Devil Vacuum Cleaner Owner's Manual - Page 8

Browse online or download pdf Owner's Manual for Vacuum Cleaner Dirt Devil Vacuum Cleaner. Dirt Devil Vacuum Cleaner 14 pages. Vacuum cleaner dirt devil
Also for Dirt Devil Vacuum Cleaner: Owner's Manual (10 pages), Owner's Manual (8 pages), Owner's Manual (8 pages), Owner's Manual (18 pages), Owner's Manual (18 pages), Owner's Manual (18 pages), Owner's Manual (18 pages)

Print Page
Dirt Devil Vacuum Cleaner Owner's Manual
BELT OR BRUSHROLL: REMOVAL & REPLACEMENT
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE CHANGING BELT OR
BRUSHROLL.
BELT STYLE
15
For Belt Style 15 replacements, please call 1-800-321-1134 or visit our website at
www.dirtdevil.com to locate a dealer nearest you.
TO REMOVE BELT
1.
2.
Lay cleaner flat and flip cleaner to
Tilt rollers up and away from
expose nozzle base. Base should lay
the base of the cleaner as you
flat and face up. To remove nozzle
remove the nozzle guard
guard, use Phillips screwdriver to
remove the six (6) screws. Arrows
show location of screws.
TO REPLACE BELT OR BRUSHROLL
4.
5.
Lift and remove brushroll. Dispose
Slide belt onto motor shaft.
of old belt.
7.
8.
7a.
With new belt in place, pull and slide
Reattach nozzle guard by
brushroll into nozzle making sure that
carefully sliding back into
the brushroll end caps are in the correct
place. Interlock rollers and
nozzle guard by tilting rollers
orientation (7a inset). Rotate brushroll
down towards the base while
manually to make sure belt is properly
replacing the nozzle guard.
aligned.
3.
MOTOR
SHAFT
Slide belt off motor shaft.
6.
Place new belt in area of
brushroll without bristles.
9.
Be sure to replace all six (6)
screws.
8