CLASSÉ AUDIO P-100 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Amplifier CLASSÉ AUDIO P-100. CLASSÉ AUDIO P-100 11 pages. Power amplifier

Print Page

GENERAL CONNECTIONS

A.C. LINE

Making sure the power switch is in the off position, insert the linecord into the A.C.

receptacle on the rear of the unit.

CAUTION: SAFETY INSTRUCTIONS

DISCONNECT THE AC LINE CABLE WHILE MAKING ALL CONNECTIONS. "FLOATING THE

GROUND" OR DEFEATING THE GROUND ON A 3-PRONG LINECORD MAY CREATE A SHOCK

HAZARD. CONNECT ALL INTERCONNECT CABLES BETWEEN THE ELECTRONICS BEFORE

CONNECTING THE A.C. LINECORDS TO THE WALL OUTLETS. THIS WILL REDUCE THE POTENTIAL

SHOCK HAZARD. SEE ALSO THE P-100 WARRANTY SECTION OF THIS OWNER'S MANUAL.

Input and output connectors are clearly marked on the back of the amplifier. Left/Right

connections are oriented from the front of the unit. Stereo output connections are marked above the

connectors.

Use only high quality interconnect and loudspeaker cables, and make all connections tight. If

the input plugs are loose, remove them and pinch down the ground leaves slightly with pliers.

Observe correct phasing of the loudspeaker connections, and tighten.

-5-