ABBA CDPA56 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Outdoor Light ABBA CDPA56. ABBA CDPA56 4 pages.

Print Page

Insert the wires: Insert the aligned ends of the wires

into the wire nut, ensuring that they go all the way in.

The bare ends should be completely covered by the

wire nut. Twist the wire nut: Firmly twist the wire nut

clockwise

onto

the

wires,

ensuring

secure

connection. Continue twisting until the wire nut is

tight and snug. Test the connection: Gently tug on

each wire to ensure they are securely held by the

wire nut. The connection should be firm and not

come loose. Inspect the connection: Examine the

wire nut connection to ensure there are no exposed

wires or loose strands. If any issues are detected,

remove the wire nut and repeat the process from

step 5.

Note: It's always recommended to follow local

electrical codes and regulations when performing any

electrical work. If you're uncertain or uncomfortable

with electrical tasks, it's advisable to consult a

qualified electrician. Safety should always be a top

priority when working with electrical connections.

7. For a secure and stable mounting, dig a small hole

and insert the spike into the ground, ensuring it is

vertical and firm.

8.Once the fixture(s) are securely installed, turn on

Main Line

the

power

and

enjoy

the

enhanced

lighting

experience!

Connect the wires using

WN12 (Sold separately)

We strongly recommend that the main cable from the

transformer be buried underground for safety

reasons. Additionally, please be sure to avoid

exceeding the maximum wattage on the fixture(s) to

prevent any damage or hazards.