3Com 3108 Code Manual - Page 13

Browse online or download pdf Code Manual for Telephone 3Com 3108. 3Com 3108 16 pages. Nbx feature codes guide for sip telephones
Also for 3Com 3108: Reference Manual (2 pages)

Print Page
3Com 3108 Code Manual
Table 3 NBX Feature Codes (continued)
Features
Call Forward No Answer
Forward all calls to your call
coverage point when your phone
rings for a specified number of
rings.
Call Pickup — Directed
Pick up a call that is ringing on
another user's telephone.
Call Pickup — Group
From your telephone, pick up
calls that are ringing on another
telephone in your group.
Caller ID Restriction
(CLIR — All) — On/Off
Restrict the NBX system from
sending out your Caller ID
information for all calls.
Using Codes
Press *
+ 467
+ *
+ the destination to
forward calls to
+ Send
Persists until you turn
off the feature by
entering * + 467 +
Send.
Press *
+ 455
+ *
+ the extension of the
ringing telephone
+ Send
Press *
+ 455
+ *
+ call pickup group
number
+ Send
Press *
+ 889
+ Send
Persists until you turn
off the feature by
repeating the
sequence.
How to Enter a Feature Code
Notes
To specify the number of rings before the call is
forwarded, log in to the NBX NetSet utility and go to
Call Forward > Call Forward. The default is 4.
When you specify an external telephone number as the
destination, start by entering 9 or 8 or whatever
required to access an outside line. Enter a * if a pause
is required between an access code and a destination
number.
Your telephone and the ringing telephone must be
members of the same call pickup group, or the ringing
telephone's pickup group must allow pickup from
telephones that are not members of the group.
You will receive an error indication if you enter an
invalid extension.
Your system administrator assigns call pickup group
numbers in these ranges:
4-digit dial plan: 482 – 531
3-digit dial plan: 500 – 531
You will receive an error indication if you enter an
invalid group number.
To use this feature you must have CLIR Features
enabled for your Class of Service (CoS) group. To check
if you have CLIR Features enabled, log in to the NBX
NetSet utility and go to My Calling Privileges > Call
Permissions.
To view your current CLIR setting, log in to the NBX
NetSet utility and go to My Calling Privileges >
Feature Settings.
13