Acorn Computers Limited A4000 Installation Instructions Manual - Page 2

Browse online or download pdf Installation Instructions Manual for Control Unit Acorn Computers Limited A4000. Acorn Computers Limited A4000 8 pages. Econet module

Fitting the kit

Fitting the kit
Any modification or upgrade carried out to the printed circuit board. (
PCB) of any Acorn equipment is undertaken at the sole risk of the
person carrying out the modification or upgrade.
Acorn Computers Limited cannot accept any liability for damage
caused to the product during installation of internal upgrades,
whether or not carried out in accordance with the instructions in
this document.
Before commencing an upgrade, please read all of the instructions
carefully. If you do not feel confident to carry out this upgrade, please
take the upgrade kit and your computer to an Acorn Computers
authorised dealer, who will install it for you. A charge may be levied by
the supplier for installing the upgrade kit; such a charge shall be entirely
at the discretion of the supplier concerned.

Static electricity

IMPORTANT:
electricity. To reduce the possible adverse effects of static electricity
note the following points when installing any component(s) or upgrade:
avoid working in areas where there are man-made fibres, such
as nylon carpets and nylon clothing
after the computer is disconnected from the mains, touch the
metalwork of the case while performing the upgrade to ensure
that you and the computer are at an equal potential
avoid touching the pins of the PCB during fitting.
Most electronic devices can be damaged by static