Dirty Hand Tools 104950 Operation Manual - Page 9

Browse online or download pdf Operation Manual for Power Tool Dirty Hand Tools 104950. Dirty Hand Tools 104950 20 pages. Vibratory plate compactor

Print Page

HANDLEBAR

END

Figure 1

Figure 2

Handlebar and Wheel Assembly

Mounting the Handlebar Assembly

1. Unfold the handlebars (see Figure 1).

2. Place the handlebar ends into the mounting channels on the engine's

deck, carefully aligning the holes in each side (see Figure 2). Secure

the handlebar ends to the channel with a hex bolt (M10x65mm), flat

washer and locknut.

3. Position the throttle control onto the upper portion of the handlebar

and secure with a flat washer and hex bolt (M5x25mm).

Mounting the Folding Wheel Assembly

1. Position the folding wheel assembly at the rear of the plate compactor.

Line up the holes in the mounting links with the holes in the engine

deck and secure with hex bolt (M10x30mm), flat washer and lock nut

on each side (see Figure 3).

THROTTLE

CONTROL

MOUNTING

CHANNEL

FOLDING

WHEEL KIT

Figure 3