DIS Repeater RP 6004 User Manual - Page 10

Browse online or download pdf User Manual for Repeater DIS Repeater RP 6004. DIS Repeater RP 6004 14 pages. Repeater for dcs 6000

Print Page

Danish Interpretation Systems

System Setup

Connect the RP 6004 to the various units using Cat

5 FTP or STP cables. Please observe the following

guide lines:

Maximum cable length in one chain is 200

without

interconnection cables between the units.

The max. usable cable length depends on

the units connected and length of feeding

cables etc.

Maximum cable length in one chain when

using repeaters is 650 m.

As the RP 6004 Repeater is repeating only

one of the four outputs A (A1 or A2) or B

The optional 19"-Brackets allow the unit to be

mounted in a rack with either the front (connector

side) or the blank backside to the front side of the

rack. The height is 1HU and allows units to be

stacked using only 44mm rack height.

repeater.

This

includes

(B1 or B2) the max. number of languages

configured on the four outputs (1, 2, 3 and

4) is totally max. 16.

If more languages are required, Interpreter

sets for those languages have to be divided

between both chains (A or B) on the CU

6010. Normally the languages are supposed

to be divided equally on chains A (A1 or

A2) and B (B1 or B2).

If the last unit in one chain is a CS 6032

Channel Selector, this unit has to be

terminated with an external termination, as

the CS 6032 does not have an internal

termination.

Can also be mounted at the back of the rack cabinet

freeing the space at the front of the rack. The

cabinet shall then be deep enough to allow this.

Manual 01 18 04466

User Manual