Disc Makers ElitePro User Manual - Page 10
Browse online or download pdf User Manual for Disc Duplicator Disc Makers ElitePro. Disc Makers ElitePro 13 pages. Elite series
Print Page
10
ElitePRO Getting Started Guide
10
Minimize Discus to return to the Disc from Disc Duplication wizard. The wizard
displays a selection box that allows you to choose the output.prn file as the
source for the automated duplication and printing task. Once this image file has
been selected, click Next to continue the procedure.
Note: Additional information on creating label images is included in the Elite Series
User Guide and the Discus User Guide, which can be accessed through the Discus
help system.
Duplicating discs for the first time
At the completion of the wizard, FlexWare returns to the main application window
with all the appropriate settings established.
1
To start the duplication operation, first check to see if you have a master CD in
the input spindle with two blank CDs underneath it.
2
Click the Play button in the center of the window. The ElitePRO duplicator pick
arm rotates to the input spindle, lowers to pick up the master disc, extracts the
master disc, and places it in the upper disc recorder. FlexWare then proceeds to
make a temporary image from this master to use during the copy operation.
3
Once the image is made, FlexWare unloads the master and places it on the
output spindle. The program then proceeds to load each of the blank discs
and copy the image to them. Each of the copied discs is then loaded into the
printer and the selected image is printed on the disc surface.
4
The operation ends when FlexWare unloads the completed discs onto the out-
put spindle.
ElitePRO_Getting_Started_03.indd 10
2/20/06 4:40:09 PM