Disc Makers ReflexMax1 User Manual - Page 5

Browse online or download pdf User Manual for Disc Duplicator Disc Makers ReflexMax1. Disc Makers ReflexMax1 9 pages. Cd reflexmax series
Also for Disc Makers ReflexMax1: Quick Start Manual (1 pages), Quick Start Manual (2 pages), User Manual (13 pages)

Print Page

The ReflexMax1 is a high performance CD-R one-to-one disc duplicator

designed for both the novice and professional user. The ReflexMax1 is

designed for a variety of applications that require the exchange of audio,

video or data content. The following is a User Guide that outlines the menu

commands of the unit and immediate functions of the unit. For additional

technical support please call 1-888-800-4041.

GETTING STARTED

Carefully remove the ReflexMax1 CD-R duplicator from its shipping container.

Please inspect the contents and verify them against the packing slip. Be sure

to report any errors in shipping immediately to Disc Makers.

Packing materials: Please save the original box and packaging in the event the

unit requires future service or you need to move the unit from one location to

another. This will help reduce the possibility of damage in transit.

Please Note: Any item that needs to be returned for a warranty repair must be

returned in original packaging.

NSTALLATION AND

ETUP

1. Unpack the ReflexMax1 and place the unit in a clean and cool work area.

Keep the external packaging for future storage and transportation.

2. Place the ReflexMax1 on a flat, clean, and dust-free surface.

3. Connect the power cord from the back of the unit to an electrical outlet. Do

not bypass the Ground.

4. The Front panel should appear as below.

1-888-800-4041

UNCTIONS

1. C

OPY

1. Power on the system by pressing the button on the lower right front of the

unit. You will then see the system initializing and performing a self test on

the front panel LCD. The LCD will display Detect Drives, and then switch to

Copy mode.

2. To begin the duplication operation, load the top drive (reader) with a master

CD. Load the lower drive (writer) with high-quality CD-R media.

3. Press the ENT button to begin duplicating. The unit will automatically ana-

lyze the master disc (this may take a few moments) and begin duplicating

at the maximum recording speed.

4. The LCD will display OK when the duplication is complete and the number of

successfully copied discs. (See screen display below.) Upon successful

duplication the copied disc will be ejected. If the duplication fails, the disc will

remain in the bottom drive until the eject button on the drive is pressed.

To continue the same duplication job; reload the writer drive with another

blank CD-R and press the ENT button to start duplicating again. To start a

new duplication job, place a new master CD in the top reader drive.

2. T

EST

The Test Function is used to check whether a disc will successfully copy. It

simulates the copying process. When concluded no data will be written to

media writer drive.

1. Select the Test Function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master disc and load the lower drive

(writer) with high-quality blank CD-R media.

www.discmakers.com

Copy

OK: 01