Disc Makers ReflexUltra User Manual - Page 9

Browse online or download pdf User Manual for Disc Duplicator Disc Makers ReflexUltra. Disc Makers ReflexUltra 13 pages. Dvd±r
Also for Disc Makers ReflexUltra: Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Print Page

load the recorder drives with Disc Makers Ultra CD-Rs. Press the ENT button

to start the process. The unit will analyze the master on the Src drive, and

then any disc in the recorder drives.The LCD will display the number of discs

that passed the test and then proceed directly to the copy process. Upon

doing a successful Test and Copy the following will display on the LCD.

3. Test and Copy

OK: 02

In this example, two discs were successfully tested and copied.

If the target blank CD-R has already been written to, or is damaged and can-

not be written to, the drive for this disc will not open. Likewise, if the data on

the master CD will not fit on the blank target CD, the drive will remain closed.

4. V

ERIFY

The Verify function is used to confirm that the master and the copy read the

same. Again this function operates similarly in both the Hard-Drive-to-Disc

and the Disc-to-Disc mode

1. Select the Verify function using the Up and Down arrows.

2. In the Hard-Drive-to-Disc mode: load the drives with the copied discs. The

unit will analyze the master on the hard drive, and then compare that to any

disc loaded in the recorder drives. The LCD will display the number of discs

that verified correctly and the number that failed the verification. Those that

verified correctly will be ejected from the recorders. All failures will remain in

the drives.

3. In the Disc-to-Disc mode: Load the top drive Src with the master disc and

load the recorder drives with the previously written media. Press the ENT

button to start the process. The unit will analyze the master in the Src drive,

and then any disc in the recorder drives.The LCD will display the number of

discs that verified and the number that failed. Those that verified correctly

will be ejected from the recorders. All failures will remain in the drives.

1-800-237-6666

In the example above, three discs verified correctly and one disc failed the

verification.

The F-> indicates that by pressing the ENT button the failed disc(s) will be

ejected from the recorders. Please be careful to remove the correctly verified

disc(s) before pressing ENT again.

To verify more duplicated discs, simply fill the recorders and press ENT,

again.

5. C

OMPARE

The Compare function takes the Verify function one step farther, it gives

details about the master and copied disc. It also ejects the disc upon a suc-

cessful comparison.

1. Select the Compare function using the Up and Down arrows.

2. In the Hard-Drive-to-Disc mode: load the drives with the copied discs. The

unit will analyze the master on the hard drive, and then compare that to any

disc loaded in the recorder drives. The LCD will display the number of discs

that compared correctly and the number that failed. Those that passed the

comparison will be ejected from the recorders. All failures will remain in the

drives.

3. In the Disc-to-Disc mode: Load the top drive Src with the master disc and

load the recorder drives with the previously written media. Press the ENT

button to start the process. The unit will analyze the master on the Src drive,

and then any disc in the recorder drives. The LCD will display the number of

discs that compared correctly and the number that failed. Those that passed

the comparison will be ejected from the recorders. All failures will remain in

the drives.

www.discmakers.com

4. Verify

F->

OK: 03

Fail: 01