Armytek Barracuda XP-L User Manual
Browse online or download pdf User Manual for Flashlight Armytek Barracuda XP-L. Armytek Barracuda XP-L 2 pages.
Print Page
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Do not allow children to use the flashlight without your assistance.
The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.
Care and Storage
It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings. To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.
In case the rubber button is damaged, it should be replaced. You can also replace the switch with
the spring in the same way. Replacement order:
1. Unscrew the tailcap.
2. Unscrew the first washer inside it to take out the switch. To do so you should use needle-
nose pliers (round-nose pliers or another tool, the most suitable will be expansion pliers).
Use the tool as it is shown at the picture. To replace the rubber button unscrew the second
washer under the switch.
3. Replace the rubber button and assemble the parts in inverse sequence.
Do not disassemble the flashlight except for unscrewing the thread ring gage and replacing the rubber button. There are no
other parts in the flashlight that can be replaced by the user.
Service and Warranty
Armytek provides free warranty repair for 10 years from the date of purchase.
Warranty doesn't cover damage caused by:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5. Usage of low-quality batteries.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: [email protected]
Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Specifications are subject to change without notice.
Warnings
Barracuda
THE MOST TECHNICALLY ADVANCED
FLASHLIGHTS IN THE WORLD
USER MANUAL
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
Specifications
Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan.
10 years no-hassle warranty
Extreme brightness –
1450
LED lumens.
§
Unprecedented beam distance up to 775 meters for efficient illumination of large areas.
§
Ultra-strong materials and robust construction guarantees total protection harsh impacts or vibrations.
§
Light-weight flashlight with constant light and fail-proof reliability.
§
Simple operation and continuous runtimes –
1.5 hours at maximal mode and almost 17 hours
§
Сonstant brightness with almost discharged batteries and at -25ºC outside.
§
The highest IP68 dust- and waterproof standard – more than 5 hours at 50 meters depth.
§
Guaranteed durability – stands up the recoil of any gun gauge and falling from 30 meters height.
§
Model
Barracuda XP-L HI
LED
Cree XP-L High Intesity
Optics
Smooth Reflector
Brightness stabilization type
FULL (constant light)
Light output, LED / OTF lumens*
1350 / 1150
Peak beam intensity, candelas
150000
Hotspot / spill
5° / 40°
Beam distance*
775 meters
Turbo
1150 lm / 1.7h
Modes, light output (OTF
Main3
370 lm / 6h
lumens*) and runtimes
Main2
170 lm / 17h
(measured with 18650 Li-Ion
3400mAh until the light output
Main1
28 lm / 70h
drops to 10% of the initial
Firefly
1.7 lm / 30d
value)
Strobe
15 Hz / 1150 lm / 3.3h
Power source
2x18650 Li-Ion / 4x18350 Li-ion / 4xRCR123 Li-ion / 4xCR123A
Size and weight (without batteries)
Length 262mm, body diameter 25.4mm, head diameter 64mm, weight 303g
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
We DO NOT RECOMMEND to use low-quality CR123A batteries as a power source for often and continuous flashlight's
operation, because they can explode.
.
at middle mode.
Barracuda XP-L
Cree XP-L
1450 / 1200
114000
675 meters
1200 lm / 1.7h
440 lm / 6h
200 lm / 17h
35 lm / 70h
2 lm / 30d
15 Hz / 1200 lm / 3.3h