Armytek Partner C1 Pro User Manual - Page 2

Browse online or download pdf User Manual for Flashlight Armytek Partner C1 Pro. Armytek Partner C1 Pro 2 pages.
Also for Armytek Partner C1 Pro: User Manual (2 pages)

Print Page

Specifications

Amazing brightness and extreme beam distance in four different sizes and with various power sources.

TIR-optics for smooth light beam and no «tunnel vision» effect even after continuous use.

Additional side button for comfortable one-hand operation.

Solid and impact-resistant body ensures the flashlights' efficiency even after the fallings from the height of 10 meters.

The highest standard of water- and dustproof IP68 – submersion to the depth up to 10 meters.

Compact size and small weight perfect for constant carrying in the bag, pocket or on the belt.

Compatible with original remote switches and weapon mounts.

Warning Indication of low battery level and real-time temperature control.

The flashlight has 2 buttons. Tactical button (in the tailcap) switches the flashlight on/off. Side button changes the modes only.

Momentary on

Half Press & Hold (no click)

Release

1/2

OFF

Cycling through modes

Click x1

Firefly

Turbo

Main1

Main3

Main2

Strobe

Press & Hold

Strobe1 в Strobe2

Click x1

гд

Strobe

Strobe в Last used mode

How to change Turbo1 & Turbo2

Half Press & Release (no click)

1/2

x15

Low Battery Indication

High Temperature Indication

Warning

Critical

Warning

Critical

2sec

1sec

2sec

< 25%

< 10%

WARM

HOT

Digital Light Stabilization & Safe Soft-Start System monitors battery voltage, starts the flashlight at an admissible brightness or

decreases it by steps when the voltage dramatically fall down. These actions increase runtime, use all available energy, get longer

lifetime of rechargeable battery and protect it from overdischarge or overheating.

Warning indication shows the battery level and the temperature inside the flashlight.

Low battery level. When it is < 25%, the color LED will show the warning level – flashing in orange color once in 2 second. With a further

voltage reducing brightness will start to decrease in steps for safety of the battery and user. If the brightness will be <25% from nominal

value, the main LED will flash 2 times ONCE. Critical battery level <10% is red indicated once a second.

High temperature (for Partner C2/C4 Pro only). When it increases to the warning level – the color LED flashes by orange 3 times once in

2 seconds. At critical level it flashes by red 3 times once in 1 second, brightness starts to reduce. After cooling down the brightness

–

increases to usual level.

Operation

Momentary on. The flashlight is switched on by half-pressing of

tactical button and stays active till the button is released. It is

suitable for giving signals by short button pressings. Click the

button to switch the light on permanently.

Cycling through modes. To switch the mode click the side

button.The modes switch cyclically: Firefly – Main1 – Main2 –

Main3 – Turbo.

Strobe:

When the flashlight is ON (at any permanent light mode) press

and hold the side button to turn on the last used Strobe mode.

Press and hold the side button again. The modes switch

cyclically: Strobe1 – Strobe2.

To switch to the last used permanent light mode click the side

button once.

How to change Turbo1 & Turbo2:

There are two Turbo modes. You will use only one, but can

select which one. Turbo2 is boost mode for maximal brightness

and set by default. Turbo1 is constant brightness mode (more

powerful than Main modes). Half press & release the button

(without click) at least 15 times. The flashlight must be

switched on at the end of these actions.

The light will flash 1 or 2

times to show the number of Turbo chosen.

Automemorizing. After switching off the last used Mode is

memorized for quick 1-click access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for the protection

from accidental switching on. State Indication will be turned off.

Constant light. Powerful electronics provide constant

brightness even in the Turbo1 mode, using all energy of the

battery. And the Turbo2 mode gives the maximum brightness

as the Overboost technology in cars, but until temperature of a

flashlight and a discharge current of the battery don't exceed

critical values.

Active temperature control (for Partner C2/C4 Pro only). The

flashlight can heat up in Turbo mode quickly. When the

temperature become +60ºC

–

the brightness decreases by

small steps. After cooling-down (provided that battery voltage

is sufficient) the brightness increases to the Turbo mode again.

This stepping goes cyclically to maintain the user's safety and

the flashlight's functionality. In conditions of good air-cooling

the flashlight delivers light without stepping down even in Turbo

1sec

mode. There are no preset timers for stepping, but real-time

active temperature measurements.