Discount Car Stereo A2DIY-BKR Quick Start Installation Manual - Page 6

Browse online or download pdf Quick Start Installation Manual for Car Stereo System Discount Car Stereo A2DIY-BKR. Discount Car Stereo A2DIY-BKR 11 pages. Becker aux ready radios

Print Page

USB Bracket

(No drilling)

Locate a flat surface at location of choice within 3.2 ft. of radio and

mount USB support bracket (See Fig. 15) to surface using

adhesive/tape or screws.

mounting bracket

Repeat steps 2 from "Flush to Dash or Panel" instructions.

Tuck and secure any extra wire away from moving parts and test operation (

Bluetooth Pairing and Connection

Fig. 15

Operation:

One important step in this process is enabling AUX function within radio menu.

Most Becker radios are pre-programmed to recognize a CD Changer connection

and because of that you must perform the following steps and change setting to

"AUX" otherwise audio playback will not be possible.

Enabling AUX Menu function

See

Radios with TP button: (i.e. CDR-220)

Turn radio "ON"

2. Press and hold the "TP" button for about 8 seconds until Becker 1 is

displayed.

3. Turn the Tuning Knob until AUX OFF is displayed.

4. Press either button located directly under the Arrows on the display to

change the present setting from OFF to ON.

Turn radio OFF.

5. Turn Radio back ON, press "S" (Source) button to enter AUX Mode. This

is the mode to use whenever you want to listen to the device connected

to the adapter.