Discount Car Stereo A2DIY-CR12 Quick Start Installation Manual - Page 2

Browse online or download pdf Quick Start Installation Manual for Car Stereo System Discount Car Stereo A2DIY-CR12. Discount Car Stereo A2DIY-CR12 8 pages. Bluetooth add-on module for porsche cr-1 and cr-2 radios

Print Page

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

This installation guide is provided as a GENERAL installation guide, some vehicles vary and may

•

require additional steps. We do not accept responsibility for third party labor charges or

modifications. Exercise due-diligence when installing this product.

We do not accept any responsibility for vehicle damage or personal injury resulting from the

•

installation of this product.

Careless installation and operation can result in equipment damage

•

Requirement

Porsche CR-1 or CR-2 radio

Introduction

If looking to add

Bluetooth®

features to Porsche CR-1 or CR-2 radios you should

consider the A2DIY-CR12adapter kit. This revised easy to install kit is essential to

adding

Bluetooth®

features to older Porsche vehicles while keeping everything

stock. This "triple play" module supports aptX "CD-like' high quality audio for

streaming music and sounds great for (1) mobile conversations, (2) streaming

Pandora, Sirius radio, Apple music, audiobook, podcast and (3) CD changer

retention OR an AUX input for vehicles without changer. Use included media remote

control to adjust Smartphone: volume, track up/down/pause and more and can be

mounted to steering wheel or dashboard. In addition, an optional "Smart charger'

kit helps to keep devices charged while on the road. Thanks to the A2DIY-CR12 kit,

Porsche owners can update to

Bluetooth®

Warning: Porsche CR-1 and CR-2 radios are coded and will not operate without

the code. Do not proceed with step 7 if radio code is unavailable otherwise radio

will not operate upon reconnection.

See Frequently Asked question at the end of this guide for more details.

without changing original radio.

Installation 1

Use these steps for vehicles without CD changer or if changer is no longer

wanted and/or disconnected.

Radio removal required to gain access to connectors.

Remove trim ring and ensure both tabs are centered at which point radio is pulled

from dash (grasping the cassette opening provides some leverage) or push from

rear.

Connect 13-pin adapter plug (See Fig. 1) to radio 13-pin connector (See

Fig. 2)

radio connector

Fig. 1

Fig. 2