Armytek Optoelectronics Partner C2 User Manual

Browse online or download pdf User Manual for Flashlight Armytek Optoelectronics Partner C2. Armytek Optoelectronics Partner C2 2 pages.

Print Page

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less

capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

The producer will not be liable for any harm done to the user if it was caused by

improper use of the product.

Care and Storage

It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection

from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and

sealing rings. To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as

it can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of

automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts

as often as required.

In case the rubber button is damaged, it should be replaced. You can also replace the switch with

the spring in the same way. Replacement order:

1. Unscrew the tailcap.

2. Unscrew the first washer inside it to take out the switch. To do so you should use needle-

nose pliers (round-nose pliers or another tool, the most suitable will be expansion pliers).

Use the tool as it is shown at the picture. To replace the rubber button unscrew the second

washer under the switch.

3. Replace the rubber button and assemble the parts in inverse sequence.

Do not disassemble the flashlight except for unscrewing the thread ring gage and replacing the rubber button. There are no

other parts in the flashlight that can be replaced by the user.

Service and Warranty

Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years

warranty) from the date of buy with the document confirming the purchase.

Guarantee does not extend to damage during:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

Armytek Optoelectronics Inc.

Web: www.armytek.com Email: [email protected]

Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada

Specifications are subject to change without notice.

Warnings

Partner

THE MOST TECHNICALLY ADVANCED

USER MANUAL

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Specifications

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your

needs. The components made in the USA and Japan.

10 years no-hassle warranty

Amazing brightness in four different sizes and with various power sources.

Extreme beam distance for such a compact tactical light.

TIR-optics for smooth light beam without sharp edges. No «tunnel vision» effect after continuous use.

Solid and impact-resistant body ensures the flashlights' efficiency even after the fallings from the height of 10 meters and harsh

impacts.

The highest standard of water- and dustproof IP68 – submersion to the depth up to 10 meters.

Compact size and small weight perfect for constant carrying in the bag, pocket or on the belt.

Compatible with original remote switches and weapon mounts.

Model

Partner A1

Partner A2

LED / Optics

Brightness stabilization type

FULL (constant light)

Light output, LED / OTF lumens*

600 / 500

850 / 700

Peak beam intensity, candelas

3280

5080

Hotspot / spill

Beam distance*

115 meters

143 meters

Modes, light output

Turbo

500 lm / 0.8h

700 lm / 0.8h

(OTF lumens*) and

Main3

95 lm / 4.2h

95 lm / 8.3h

runtimes (measured

with Sanyo Eneloop AA

Main2

34 lm / 11.7h

34 lm / 25h

2000 mAh / Armytek

CR123A 1500 mAh /

Main1

10 lm / 35h

10 lm / 75h

Armytek 18650 Li-Ion

3400 mAh until the light

Firefly

2 lm / 8d

2 lm / 17d

output drops to 10% of

Strobe

15Hz/ 500lm/ 1.7h

15Hz/ 700lm/ 1.7h

the initial value)

Power source

1xAA /

2xAA

1x14500 Li-Ion

Size and weight (without

Length 104mm,

Length 150mm,

batteries)

body diameter

25.4mm, head

diameter 24.5mm,

weight 59g

weight 66g

* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.

We DO NOT RECOMMEND to use LOW-QUALITY CR123A batteries as a power source for often and continuous flashlight's

operation. Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.

Partner C1

Partner C2

Partner C4

Cree XP-L or XM-L2 / TIR

DIGITAL (CPU

FULL (constant

brightness control)

light)

800 / 650

1250 / 1050

1450 / 1200

4320

7560

9360

20° / 8 0°

131 meters

174 meters

193 meters

650 lm / 0.7h

1050 lm / 1.5h

1200 lm / 1.7h

95 lm / 6.2h

410 lm / 3.8h

410 lm / 6h

34 lm / 18h

190 lm / 9h

190 lm / 17h

10 lm / 55h

32 lm / 48h

32 lm / 70h

2 lm / 13d

2.5 lm / 18d

2.5 lm / 30d

15Hz/ 650lm/ 1.7h

15Hz/ 1050lm/ 3h

15Hz/ 1200lm/ 3.3h

1x18350 Li-Ion /

1x18650 Li-Ion /

2x18650 Li-Ion /

1xR123 Li-Ion /

2xCR123A /

4xCR123A /

1xCR123A

2xR123 Li-Ion

4xR123 Li-Ion

Length 88mm,

Length 119mm,

Length 188mm,

body diameter

25.4mm, head

diameter 24.5mm,

weight 55g

weight 61g

weight 72g