Armytek Optoelectronics Wizard Pro User Manual - Page 2

Browse online or download pdf User Manual for Flashlight Armytek Optoelectronics Wizard Pro. Armytek Optoelectronics Wizard Pro 2 pages.
Also for Armytek Optoelectronics Wizard Pro: User Manual (2 pages)

Print Page

Set description

Wizard

Depending on the model, your flashlight can inconsiderably differ from the pictures in the manual.

The producer reserves the right to change the package at his own discretion without modifying this manual.

Initial Service

The removable magnet in the tailcap.

With its help you can easily attach the flashlight to an electric service panel, a bike handlebar,

above a car wheel, etc.

The magnet can be taken out of the tailcap. To do this unscrew the small cover at the end of the

tailcap and put the magnet out.

Specifying the battery type for correct voltage indication.

Do not specify the type of power source manually unless you use unprotected Li-Ion batteries. 1x18650 Li-Ion battery is by default.

Press & Hold

Release & Click

OFF

Firefly1

Max

Main3

Firefly2

Main2

Firefly3

Main1

To access the Menu press and hold the switch button (when the flashlight is switched off). It will switch on, go through the all available

modes and then switch off again. After switching off, release the button quickly and click it rapidly again. The flashlight will enter the

Menu and the LED will flash about 3 times a second.

Now you can specify the battery type: 1 click for 1x18650 Li-Ion, 2 clicks for 2xCR123A, 3 clicks for 2xRCR123 Li-Ion.

After the choice is made the light will flash 1, 2 or 3 times to show the battery type chosen.

To use the head mount with the flashlight:

Connect the

small strap

with the

silicone holder.

Fix the

flashlight and

adjust the

elastic bands

to the size

of your

head.

Items included in the package:

Flashlight

▪

Magnet

Lanyard

▪

2 spare O-rings

Clip

▪

Silicone holder

Hand band

▪

Headband (2 straps)

User manual

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing the

head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

The flashlight is ready for operation.

Click x1, x2 or x3

1x18650 Li-Ion

2xCR123A

2xRCR123 Li-Ion

Pass the ends of the big strap through

the loop of the small strap and slots in

the silicone holder (fig.b), conjoin

them in a ring (fig.c). Pass the loose

end of the big strap through the loop of

the small one in the opposite direction

and fix it in the buckle (fig.d).

Main

The flashlight has 4 Sections of modes:

Click x2

Press & Hold

[Section1] – Firefly modes

OFF вMain

Main1 вMain2

[Section3] – Maximum

Any mode вMain

Main3

In OFF state:

Main вFirefly

Click: To turn on the last used mode (Firefly, Main or Maximum). If the

Firefly

Click x2

Press & Hold

flashlight was turned on in one of the Special modes it will turn on in the last

used Main mode.

Firefly

OFF вFirefly

гд

Press and hold: To turn on Firefly1 mode in [Section 1].

Main

Firefly1 вFirefly2

In ON state:

Firefly3

Click: To turn off the flashlight.

Maximum

Click x3

Press & Hold

Press and hold: To start cycling through the modes of the current Section. In

Maximum mode it starts cycling through the Main modes in [Section 2].

OFF вMax

Main1 вMain2

Any mode вMax

The same in OFF & ON states:

Main3

2 clicks: To turn on the last used Main mode [Section 2]. Further double clicks

will switch modes between the last used modes in [Section 1] and [Section 2].

Special

Click x4

Press & Hold

3 clicks: To turn on the Maximum mode [Section 3].

OFF вSpecial

Strobe

4 clicks: To turn on the last used Special mode [Section 4].

Any mode вSpecial

гд

Beacon

Wizard Pro has 2 types of operation:

1. General. The flashlight is switched on/off permanently.

State Indication

Switching State Indication ON/OFF

Battery level

2. Tactical. The light turns on for the time the button is being pressed. It will

switch on in the last memorized mode (except for the Special modes). This

< 100%

< 50%

type of operation is useful for short-time lighting and setting signals.

To access the Tactical operation type, unscrew the tailcap to 1/4, press the

Press & Hold

5sec

button and tighten the tailcap again keeping the button pressed. To return to

Low Battery Indication

High Temperature Indication

the General type, unscrew the tailcap to 1/4 and tighten it again.

Warning

Critical

Warning

Critical

You have a convenient momentary access to all Modes:

Main. Double click from OFF or ON state turns on the last used Main Mode.

Firefly. Press and hold the button in OFF-state to turn on the Firefly1. Press

and hold after Firefly activation to start cycling through the Firefly modes:

1sec

0.5sec

1sec

release the button to select one. Firefly modes can be also accessed from the

Main mode by a double click.

< 25%

< 5%

WARM

HOT

< 10%

HOT

вFirefly1

вMain3

Maximum. 3 clicks from OFF or ON state turn on the Maximum mode.

вOFF

вFirefly2

Special modes (Strobe / Beacon). 4 clicks from OFF or ON state turn on the last used Special mode: Strobe / Beacon.

Cycling through modes. In ON-state press and hold the button in any mode: the modes of the current Section will start switching

cyclically. Release the button to select the desired mode. In Maximum mode it starts cycling through the Main modes.

Automemorizing. After switching off the last used Mode is memorized for quick 1-click access at next switching on. If the flashlight was

turned on in one of the Special modes it will turn on in the last used Main mode.

Lock-out function. Unscrew the tailcap to 1/4 for the protection from accidental switching on. State Indication will be turned off.

Multicolor State Indication. Shows the battery level by short flashes every 5 seconds. State Indication in OFF state and Firefly modes

can be helpful to find the flashlight in the dark.

Switching Multicolor State Indication ON/OFF. It is switched off by default in OFF-state and Firefly modes. To turn on and off: unscrew

the tailcap to 1/4, press the button and holding the button pressed - tighten the tailcap and then unscrew it again. The settings will be

memorized even when battery is changed.

Warning Indication. In ON-state shows the battery level and the temperature inside the flashlight.

Low battery level. When it is <25%, the color LED shows the warning level once a second and the main LED flashes 2 times once a

minute. Critical level <5% is color indicated twice a second and light output decreases to Firefly1 and then switched off.

High temperature. When it increases to the warning level, the color LED flashes 3 times once a second. At critical level the main LED

flashes 4 times once a minute and the light output decreases to Main3 mode. In case the temperature doesn't fall the light output

decreases to Firefly2. At normal temperature the brightness increases to usual level.

Operation

[Section2] – Main modes

[Section4] – Special modes