BLADEZ AEROPRO H930 Owner's Manual - Page 14
Browse online or download pdf Owner's Manual for Exercise Bike BLADEZ AEROPRO H930. BLADEZ AEROPRO H930 20 pages.
Print Page
CONSOLE
OPERATION
The console
comes with 6 buttons:
R (Recovery
test), M (Mode),
_IL
(Up or Increase),
_
(Reset),
t_lb
(Sta rt/Stop), y(Down
or Decrease).
Button
Functions
MODE:
In idle mode, pressing Mode
button will enter program
selection.
In program,
Mode button is used to confirm
the selection
or switch the display
UP/DOWN
Scrolls:
_b,Y
Scroll through
programs
before the workout
or change
resistance
level during the workout.
Start/Stop:
This key is to start or to stop the exercise.
If no speed signal is detected
in 4 seconds,
"P" is flashing
in the upper left corner.
Pressing
Start or pedaling
above 30 rpm, all functions
will resume.
In idle
mode, pressing
Start/Stop
button to workout
manually.
Re cove ry Test:
At the end of the exercise,
pressing
this button to test the fitness level.
For a valid reading,
user
must maintain
pulse input during the 60 second
recovery
countdown
test.
RESET:
Pressing
Reset button will revert to the previous
display.
Pressing
and holding for 2 seconds
will
reset all functions.
Operations
Start pedaling
above
30 rpm, the console
will power
on and flashes
all elements
of the LCD
momentarily.
Auto power
On/Off:
if there is no activity
or no speed signal detected
for 90 seconds,
the console
automatically
turns off
Programming
Functions
In programming
mode, a selection
of MANUAL,
PROGRAM,
USER,
H.R.C is flashing.
Use
_IL_
to highlight
the desired
program
press MODE to select
Manual
Mode:
At anytime,
press Start/Stop
to begin exercising
without
entering
any information.
Resistance
can
be changed
during the workout.
Alternately,
press Mode to set goal (Time, Distance,
Calories,
and
Pulse).
The parameters
to be set will be flashing.
Press_,_"
keys to set value then press
MODE to accept.
Press Start to begin the exercise.
BLADEZ
°
AEROPRO
F
_
T
N
E
S
S
12