Armytek Optoelectronics Uni C2 User Manual

Browse online or download pdf User Manual for Battery Charger Armytek Optoelectronics Uni C2. Armytek Optoelectronics Uni C2 2 pages. Universal charger

Print Page

Armytek Optoelectronics Uni C2 User Manual

Warnings

Before using battery charger, read all instructions and caution markings on the charger, battery and device using battery.

To reduce the risk of injury, charge only Li-Ion, IMR, Ni-MH, Ni-Cd, LiFePO

Do not charge primary cells like Alkaline, Zinc Carbon, Lithium or any batteries other then accepted above, as this could result

in battery explosion, cracking or leaking, causing property damage and/or personal injury.

The product should not be used immediately after it has been brought from an area of cold temperature to an area of warm

temperature. Condensed water might destroy the product. Wait until the product adapts to the new ambient temperature

before use.

Keep batteries away from fire to prevent explosion.

For proper insertion, please observe polarity indicators (+/-).

For indoor use only. Do not expose to rain or snow.

Do not place in or near water or extreme heat.

Do not use charger with damaged cord or plug.

Do not use charger if it has been severely damaged in any way.

Do not disassemble charger.

Disassembly may result in a risk of electric shock or fire.

To reduce the risk of electric shock, unplug the charger from the outlet when not in use.

Batteries should be removed from the device if it is not used for a long period of time to avoid damage through leaking.

Leaking or damaged batteries might cause acid burns when in contact with skin, therefore use suitable protective gloves to

handle corrupted batteries.

Never charge or discharge any battery having evidence of leakage, expansion/swelling, damaged outer wrapper or case, color-

change or distortion.

Please make sure the correct settings are chosen. Incorrect settings may damage the charger or cause fire or explosion.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

For connection use an attachment plug adapter of the proper configuration.

Do not expose the device to direct sunlight, heating devices, open flames; avoid extreme high or extreme low ambient

temperatures and sudden temperature changes.

Please operate the charger in a well-ventilated area. Do not operate or store it in damp area. Keep all the inflammable volatile

substances away from operating area.

Avoid mechanical vibration or shock as these may cause damage to the device.

The safe operation temperature for the charger is between -10 to 40°C, and the safe storage temperature is -20 to 60°C.

Do not short-circuit slots or other parts of the device. Do not allow metal objects come into contact with charger. May cause

electric shock, excessive heat, or fire.

Do not place heavy objects on top of the charger. Avoid unstable locations like areas with strong magnetic fields or dust.

Excessive heat or fire may cause.

Do not touch hot surfaces. The rechargeable batteries or the device may become hot at full load or high power

charging/discharging.

This power unit is intended to be correctly oriented in a vertical or floor mount position.

Service and Warranty

Armytek provides free warranty repair for 5 years from the date of purchase (excluding batteries, switches and connectors

which have 2 years warranty). Warranty doesn't cover damage caused by improper usage, described above in Warnings section.

Armytek Optoelectronics Inc.

Web: www.armytek.com Email: [email protected]

Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada

Specifications are subject to change without notice.

rechargeable batteries

Uni C2

Universal charger

THE MOST TECHNICALLY ADVANCED

FLASHLIGHTS AND CHARGERS IN THE WORLD

USER MANUAL

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Specifications

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces smart and universal chargers designed especially for your

needs. The components by the USA and Japan.

5 years no-hassle warranty

Intelligent automatic detection of battery

AUTO

type, charge level and optimal current

DETECT

Supports IMR, Li-Ion 4.2V, Li-Ion 4.35V,

ALL

Ni-MH, Ni-Cd and Li-FePO

batteries

TYPES

Quick charge with fully independent

2 1А

channels and 1A current for each

Easy selection of battery type and charge

SIMPLE

CONTROL

current with one button per each channel

Over-discharged and sleeping battery

activation function with safe 0.1A current

START

Additional features:

џ Charging of the batteries with diameter 10..32mm and length 30..70mm, for example:

AA, AAA, AAAA, C, D, 10440, 14500, 16340, 18350, 18650, 26650, 32650

џ Digital control of precise charge algorithm and advanced safety features to extend battery lifespan

џ Instant battery type and current indication upon installation and their easy individual settings per channel (after auto-detection

of IMR/Li-Ion 4.2V or Ni-MH/Ni-Cd 1.5V)

џ Capability of hand settings for battery type and low current, also charging of battery, which is recognized as bad

џ Always visible LED indication of the current and battery charge level per each channel (without button touching)

џ Auto-memorization of last used battery type

џ Night mode of LED indication with lower brightness after 30 sec

џ Short-circuit and overtime prevention to protect batteries (20 hours for 0.5/1A and 30 hours for 0.1A current)

џ Soft-start function to avoid damage from high current

џ Optimized charge algorithm for IMR and Li-Ion/Li-FePO4 batteries with Trickle charge and CC/CV stages

џ Utilizes independent negative delta V control (dV/dt) for Ni-MH/ Ni-Cd batteries charging termination

Technical parameters:

Input: AC 85-264V / 0.5A (50/60Hz) or DC 9-14V / 1A

Output per each channel:

Voltage: 4.35V / 4.2V / 3.7V / 1.5V

Current: 1A / 0.5A / 0.1A

Low Cut-off current: 40mA (0.5A) or 80mA (1A)

Size / Weight: 145x72x37mm / 168g

Multi-color LED indication with Night mode

and useful 5 LEDs per channel

Designed for excellent heat dissipation

C °

and made with fire-proof materials

Auto-detection of bad batteries, reverse

AUTO

TEST

polarity and primary batteries

Monolitic design with AC 85-264V input

CAR

and DC 9-14V car adapter inside

ADAPTER

Automatically stops the charging when

AUTO

STOP

complete depending on the battery