Discount Car Stereo A2DIY-CR12 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Automobile Accessories Discount Car Stereo A2DIY-CR12. Discount Car Stereo A2DIY-CR12 8 pages. Bluetooth kit for porsche cr-1 and cr-2 radios

Print Page

7. Connect (car side) 8-pin plug,from step 6 to installation harness 8-pin

connector (See Fig. 8).

8. Connect 8-pin plug from installation harness (See Fig. 8) to (radio side)

8-pin connector vacated in step 6.

Note: These plugs/connectors are keyed and mate only with each other.

Proceed to "Pairing" section on page 6

Installation 2

: (Retaining functioning CD changer)

Radio removal required to gain access to connectors.

Remove trim ring and ensure the 2 tabs are centered at which point the radio

is pulled out the dash (grasping the cassette opening provides some leverage)

or push from rear. Proceed with step 1 below

Disconnect factory CD changer plug from radio

2. Connect factory CD changer plug to module 13-pin connector

3. Connect module installation harness 13-pin plug (See Fig. 9) to radio 13-

pin connector (See Fig. 10)

Fig. 8

installation harness

Fig. 10

radio connector

4. Proceed to step 3 on page 3 to complete the rest of the installation

Fig. 9