Discount Car Stereo IL-BKR Quick Start Installation Manual - Page 5

Browse online or download pdf Quick Start Installation Manual for Adapter Discount Car Stereo IL-BKR. Discount Car Stereo IL-BKR 9 pages. Apple lightning adapter for becker aux ready radios

Print Page

Operation:

One of the most important steps in this process is enabling the AUX function
within Becker radio menu. Most Becker radios are pre-programmed to
recognize a CD Changer connection and because of that you must change the
setting from "CD Changer" to "AUX" otherwise this adapter will not perform as
intended. This process is done upon initial install and will not have to be repeated
unless power is removed from radio for some time.
Enabling the AUX function
Radios with TP button: (i.e. CDR-220)
1.
Turn radio "ON"
2. Press and hold the "TP" button for about 8 seconds until Becker 1 is
displayed.
3. Turn the Tuning Knob until AUX OFF is displayed.
4. Press either button located directly under the Arrows on the display to
change the present setting from OFF to ON.
Turn radio OFF.
5. Turn Radio back ON, press "S" (Source) button to enter AUX Mode. This
is the mode to use whenever you want to listen to the device connected
to the adapter.
Radios with ☼ button: (i.e. BE6104)
1.
Turn Radio "ON"
2. Press and hold the ☼ button for about 8 seconds.
3. Select AUX "ON/OFF" option.
4. Press either button located directly under the Arrows on the display to
change the setting to ON.
5. Turn radio OFF.
6. Turn Radio back ON press the "☼" button until "AUX" is displayed.
Other Radios with ☼button (i.e. BE4602)
Turn radio ON.
1.
Press and hold the ☼ button for 8 seconds, until Becker 1 is displayed.
2.
Turn the Tuning Knob until AUX OFF is displayed.
3.
Press either button located directly under the Arrows on the display to
4.
change the present setting from OFF to ON
Turn Radio back "ON" Press "☼" button to enter AUX Mode
5.
Radios with 3 Function buttons (i.e. BE4527)
Turn radio ON.
1.
Press and hold Function button #2 (center) for more than 4 seconds.
2.
The accompanying menu appears on the display.
3.
Press the multifunction button located directly under "AUX" on the
4.
display to change the present setting from OFF to ON.
The Setting is stored automatically.
5.