Arnica Damla Plus Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Vacuum Cleaner Arnica Damla Plus. Arnica Damla Plus 12 pages.

Print Page

II. General Description

Main parts of the appliance are shown as follows:

A.Upper Body Group

This group consists of motor, switch and operation units.

•A1. ON/OFF Switch

•A2.Foam Filter

•A3.Suction Inlet

•A4.Locking Peg

B.Lower Body Group

This is the lower part of the claeaner for collecting dust and dirt into the water.This group is fastened with Motor unit using clip locks.

•B1. Lower Body (Transparent Tank)

•B2. Water Filter Body

•B3. Water Filter Sponge (to be placed into the water filter cartridge)

•B4. Water Filter Cartridge (to be placed into the housing on lower body)

•B5. Wheels

C.Hose Group

This group consists of suction hose with hand grip and suction tubes. Suction hose is connected to container group by inserting the suction

hose into suction inlet. Suction tubes can be connected to hand grip as well. Handgrip contains manual sliding for regulating suction power.

Hose group can be placed onto the motor unit by the help of hanger.

•C1. Flexible Hose

•C2. Hand Grip

•C3. Suction power Control Slider

•C4. Connecting part

•C5. Plastic Suction Tube (Jumbo Model Only)

•C6. Hanger

•C7. Telescopic Suction Tube (Jumbo Plus Model Only)

D.Accessories Group:

There are various accessories for different cleaning purposes.

•D1. Accessories Holder (Eko doesn't have this accessory)

•D2. Crevice Nozzle

•D3. Round Brush (Eko doesn't have this accessory)

•D4. Small Nozzle (Eko doesn't have this accessory)

•D5. Floor Brush

•D6. Perfume (Eko doesn't have this accessory)

III.TECHNICAL SPECIFICATIONS

Voltage

: 230V ~, 50Hz

Power

: 2400 W Max.

Electric Insulation Class : II

Degree of Protection

: IPX4

Cord Length : 5m

IV. Preparing for Use

4.1 Unlock the locking peg

4.2 Remove the Upper body by using the handle

4.3 Remove the Water Filter Cartridge

The device must be unplugged before use. Do not insert the plug int

the wall socket until the appliance is completely ready for use.