Arnica Lotus Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Vacuum Cleaner Arnica Lotus. Arnica Lotus 7 pages.

Print Page

A9. Carrying Handle

A10. Wheels

A11. Horizontal Parking socket

A12. Motor protection filter

A13. Air Filter

A14. Air Filter Lid

A15. Cable with Plug

A16. Dustbag

A17. Textile Dustbag

A18. Locking latch for the dustbag

B. HOSE AND TUBE GROUP

This group includes flexible hose with handle, extension

tubes, and other functional units. Accessories can be

fixed directly to the handle without the use of extension

tubes. An air valve is placed on the handle to adjust

the vacuum power.

B1. Flexible Hose

B2. Handle

B3. Air Valve

B4 . Telescopic Extension Tubes

B5 . Hose Connection Part

C. ACCESSORIES GROUP

For different functions, various accessories can be used.

C1. Accessories Holder

C2. Crevice Nozzle

C3. Round Brush

C4. Small Brush

C5. Main Brush with Pedal

III. TECHNICAL SPECIFICATIONS

Voltage

: 230 V, ~ 50Hz.

Power

: 1500W

Elec. Isolation Class : II

Power Cord Length : 6 m.

Energy Class

: C

IV. PREPARATION FOR USE

• Release the top section cover by pulling the dip locks

outwards.

• Place the dust bag and close the top section cover.

• Fix the flexible hose to the suction opening by using the

latches.

• Hold the plug, pull the power cord to the desired length

and plug it to the socket.

• Turn on the appliance by using the On/Off Switch.

• Adjust the vacuum power by turning the air valve on

the handle

• Vacuum power can be adjusted electronically by

using the adjustment button.

• Check the Dust Full Indicator. If the indicator shows

red;

» Dust bag is full. Change the dust bag.

» There might be a blockage inside the brushes,

tubes or hoses; clean inside them.

V. OPERATING THE APPLIANCE

• Choose the most appropriate accessories for the task

you are going to perform and fix those accessories

directly to the handle or to the extension tube.

• For an effective cleaning, following accessories can

be used:

» Main Brush: For carpets, rugs, tiles, parquetry,

marble surfaces

» Crevice Nozzle: For narrow areas such as

radiators,drawers, corners etc.

» Extension Tube without brush: For soil, wood

chippings, hair, fur and etc.

» Round Brush: For removing the dust on shelves,

lamps, shades, clothes, furnitures, electronic

devices and etc. Should be fixed to the crevice

nozzle

» Small Brush: For pillows, matresses,cushions and

couýches

• Plug the appliance to the power socket and turn on

the appliance by pressing the On/Off Switch.

• After the use of the appliance:

» Turn off the appliance and unplug it from the power

socket.

» Press the Power Cord button to rewind the cable.

Warning! Only rewind if the cable is dry. Do not

rewind the cable if it gets wet for your safety.

First dry the cable, and then rewind it!

• Brushes,tubes, crevice nozzle and hose can be placed

to the parking socket when you are not using the

appliance.

• Do not preserve the appliance outdoors or at the

temperatures that are below freezing degrees.

• Replacing the dust bag:

» Turn off the appliance and unplug it from the power

socket.

» Remove the hose from the suction opening by

pressing the buttons on the sides.

» Open the top section cover by pulling the latch

upwards.

» Remove the dustbag by pressing the latches on the

side.

» Replace the dustbag. The new dustbag can be

obtained from the certified services.

» Close the top section cover.

Warning! If your vacuum cleaner does not have a

dustbag, do not force the upper cover, because the

cover will be not closed.

VI. CLEANING AND MAINTENANCE

• Always unplug the appliance before starting any

cleaning and maintenance operations.

• Always clean the hose, tubes, filters and accessories

after use.

• To ensure perfect hygiene and to extend your vacuum

cleaner's life, never leave the appliance dirty.

• Clean the appliance's surface, tubes and accessories

with a moist towel and dry it afterwards.

• Clean the textile filter by shaking before it's pores

get completely filled. If it gets completely dirty, the

filter can washed with warm, soapy water or running

water.

Warning! Never wash the textile filter at washing

machines nor hot water.

• Keep the accessories on the accessories holder after

use. Check if the cable is damaged after rewinding

the cable.

• Use only original accessories and parts to ensure

effective cleaning, to extend your vacuum cleaner's

life and to benefit from warranty. The parts and

accesories can be obtained from a certified service.

• To clean the motor filter:

» Turn off the appliance and unplug it from the power

socket.

» Open the top section cover.

» Remove the dust bag.

» Remove the motor filter by pulling it from its socket.

» Wash the filter with water and leave it to dry. Never

put a wet filter!

» Place the filter back to its socket

» Replace damaged filters with new ones. A new

filter can be obtained from a certified service.

» Do not operate the appliance without the motor

filter.

• To clean the output air filter:

» Use the latch on the air filter cover to open the

cover.

» Remove the filter from its socket and shake it. The

filter can also be cleaned by vacuuming.(Figure 10)

» Place the filter back to its socket.

» Replace damaged filters with new ones. A new

filter can be obtained from a certified service.

» Do not operate the appliance without the air filter