Arnica Bitkidem User Manual - Page 8

Browse online or download pdf User Manual for Kitchen Appliances Arnica Bitkidem. Arnica Bitkidem 17 pages.

Print Page

DESCRIPTIONS

1. Lid for kettle

2. Lid for tea

3. Tea basket

4. Spout

5. Glass body

6. Handle

7. Base

8. 70

C Temperature selection button

9. 80

C Temperature selection button

10. 90

C Temperature selection button

11. 100

C Temperature selection button

12. Keep warm button

13. Heating / Stop button

C. TECHNICAL SPECIFICATIONS

Brand

Model

Voltage

Frequency

Power

Capacity for Kettle : 1,7 lt.

Capacity for Tea

D. USAGE

• For burning the water, press the lid opening button; the lid will open if this button bounces and then you can

remove it. If cooking the tea, you can directly remove the lid to place the tea into the tea bag and then add

the appropriate water to the level between MIN and MAX shown by the kettle water gauge.

• After adding water, place the lid properly; lift up the tea bag after covering the lid and then place the kettle

on the base; insert the power plug into the corresponding power socket and then the buzzer will beep twice

and all indicators is on for one second, so the kettle is at the standby state if no any other operation.

• The corresponding indicator will be on if the heating temperature is set, so the heating will start if the

heating button presses. The indicator will flash, the buzzer will beep once and the temperature indicator will

be on if up to the setting temperature, so the kettle is at the standby state if no any other operation for one

minute.

• Press the insulation button once to start and press it again to cancel. Only the 70

selected for insulation rather than 100

canceled if the temperature is set to 100°C. In case of the insulation function selected, if the heating button

can not be pressed within one minute, the insulation function will be canceled to enter into the standby

mode. In case of the insulation function selected, if the heating button is pressed within one minute, the

insulation timing of 30 minutes will count down.

• In the heating process, if the temperature indicator flashes, there indicates the setting heat temperature; if

this indicator is on, the water temperature has been up to or above this setting value;

• Others;

: ARNICA

: Bitkidem

: 220-240V

: 50Hz.

: 2000-2400W

: 1,2 lt.

C. If the insulation function has been selected, this function will be

C, 80

C, and 90

C can be