DISCOVER 14-24-2800 Operating Manual - Page 5
Browse online or download pdf Operating Manual for Camera Accessories DISCOVER 14-24-2800. DISCOVER 14-24-2800 13 pages. For motive power applications
Also for DISCOVER 14-24-2800: Operating Manual (14 pages)
Print Page
3. Design Features & Components
3.1 Battery Management System (BMS)
BMS Monitors
•
Cell module voltage
•
Battery voltage
•
Battery current
•
Battery temperature
•
Battery state of charge (SOC)
Module Balancing
•
BMS performs balancing of cell modules
Protection & Fault Management
•
BMS sounds buzzer when fault limits are reached
•
BMS generates fault when maximum operating limits are reached
•
Fault events cause switch to open and battery to shut down after a 120s delay
Communication Ports
•
BMS has an isolated USB and CAN communication.
•
Discover Accessory CAN Bus Battery Discharge Indicator p/n 950-0005 may be used to display battery SoC.
•
Discover Accessory CAN Bus Battery Discharge Indicator (Fully Featured) p/n 950-0005 may be used to display battery
SoC, Voltage, Current, Charge and Discharge Amp Hours and Equipment Run Hours.
•
Discover Accessory Harness p/n 790-0018 may be used to connect the battery to a computer running AES Dashboard
Software.
Data Logging
•
Monitoring data
•
Fault and warning events
•
Logged data is accessed using AES Dashboard software via the USB port (Win32, Win64 supported)
3.2 Fuse
Fuse provides back-up over-current protection.
•
A blown fuse requires replacement by a qualified installer - contact your Discover supplier.
3.3 Terminals
Terminals are button-type, M8 female.
4. Handling
• Battery should be set to OFF
• Battery cables should be disconnected
• Battery terminals should be protected
• Battery handle should be used to lift battery
• Battery should be handled by two people or mechanical lift equipment
• Do not lift or carry the battery during usage or operation
5. Installation
▲ WARNING!
Read Safety Section before installing the battery.
▲ WARNING!
Read Safety Section before installing the battery.
▲ CAUTION!
Do not install AES LiFePO
appropriate AES battery model for the voltage of your system.
batteries in series. Select the
4
5