Blake UK PROception starBOX PROSTR5S Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Switch Blake UK PROception starBOX PROSTR5S. Blake UK PROception starBOX PROSTR5S 8 pages. Distribution hubs

Blake UK PROception starBOX PROSTR5S Instruction Manual
The coupler part of the receiver eye must be connected the right way round: with the male coax
connector facing the TV and the incoming signal connected to the female port. Remote control
functions will not work if the coupler is connected the wrong way round.
Ensure that all wiring between the starBOX and the coupler provides reliable DC continuity. The most
common cause of remote control problems is poor connections in the extension rooms, resulting in
loss of power to the IR receiver eyes.
Tuning:
To view output programmes from master location set-top equipment, the extension room TVs must be
tuned-in to the output channel(s) of the equipment concerned. To tune-in these TVs leave a tape or disk
playing on a VCR/DVD player or select a known channel on a digital receiver, then tune an unused channel
setting on each of the remote TVs into the video or digital programme. For instructions on how to tune a
TV refer to its instruction manual or the manufacturer's help line or website. Similar tuning will be
required for the CCTV camera output, where installed.
Where more than one item of set-top equipment is connected in the system you may experience severe
interference (patterning) when more than one output channel is present. In this case the output channel
number (modulator channel) for one or more items will need to be changed and the relevant TV(s)
retuned. If further set-top equipment is to be used in an extension room it should be connected between
the eye coupler and the TV. The output channel from such equipment will only be available in that
extension room. To use a satellite receiver in an extension room a separately-wired feed from a dish/LNB
is required, as shown in Fig.1. This option can be of interest where a Sky+*PVR is in use at the master
location and an older Digibox has been retained for use in another room.
Fig.1—Full installation fixed wiring.