3D Creator HT3D-110 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for TV Accessories 3D Creator HT3D-110. 3D Creator HT3D-110 7 pages.

Print Page

※ 3D Source Device: Digital TV STB, Satellite Receiver, Digital CATV Receiver, Media Player, 3D Blue-ray Player,

Game Console.

Connection

Step 1: Connect the HDMI

Step 2: Connect the HDMI cable from your HDTV (or projector) to the output port of the 3D Creator.

Step 3: Connect the DC 5V/1A power adaptor to the 3D Creator.

Step 4: Finish the connection. The power indication LED (red) will be lighted on.

Operation



Mode 1: 3D Program to 2DTV

 When you want to watch 3D program on the 2DTV, please choose this mode (use

either remote or "Select" key on the main unit to switch modes)

 Use Red/Cyan glasses to watch

 Supporting 3D format (Input): Side-by-Side (Half)

 Output 3D format: 3D Red/Cyan



Mode 2: 3D Program to 3D-DLP

 When want to watch 3D program on the 3D Ready DLP projector, please choose

this mode (use either remote or "Select" key on the main unit to switch modes)

 Use DLP shutter glasses

 Supporting 3D format (Input): Side-by-Side (Half)

 Output 3D format: 3D Frame Sequential

CONNECTION ILLUSTRATION

CONNECTION & OPERATION

cables from the sources devices to the input ports of the 3D Creator.