Blake Water Solutions MOD-SOL1-BWS Operation & Installation Instructions - Page 10

Browse online or download pdf Operation & Installation Instructions for Control Unit Blake Water Solutions MOD-SOL1-BWS. Blake Water Solutions MOD-SOL1-BWS 12 pages. Equipment modules

Print Page

WATER QUALITY MONITOR MODULE

MODEL # MOD-SHERPA-BWS
Transmitter
The module comes with a Transmitter and a Remote Display. The Transmitter connects to a
standard output and high output controller and transmits the controller's status wirelessly
to the Remote Display. Every Transmitter and Remote Display is paired together and uses
encryption to create a reliable and secure communication link between the two devices. Every
Transmitter supports up to five Remote Displays. Additional Remote Displays can be purchased
and installed separately. Refer to 'Pairing an Additional Remote Display' for additional Remote
Display installation.
BWS5/BWS6
Series controllers
connection
Installation
Step 1) Power off the UV system controller.
Step 2) Plug the male plug of the Transmitter into the IEP (Infinite Expandability Port) on
the controller, or into any other module that contains an IEP (sensor, 4-20 mA
module, solenoid module, etc.) and then restart the system
Step 3) To Receive the UV system
controller's status on the
Remote Display, plug the AC/
DC wall adapter into the Power
Port on the Remote Display (5V
Max) and slide the switch to
the ON position.
8 |
P a g e
IEP
50m/164ft
(Note 2)
BWS5-C/6-C
Series controllers
IEP
connection
Back of
Remote
Display
Water Quality
Monitor
Good
Comm
Active
Caution
Alarm
Remote Display
Sensor IEP
Installation
IEP
connection
.
Note 1