Discovery Expedition D103X Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Weather Radio Discovery Expedition D103X. Discovery Expedition D103X 15 pages. Self-powered am / fm / sw/noaa weather radio
Print Page
SOLAR CHARGING
1. Install Ni-MH batteries correctly.
2. Set the Power Source Selector to "OFF" position.
3. Put the unit in the sunlight, make the solar panel of the unit is irradiated
by the sunlight.The unit will charge the rechargeable battery automatically.
4. While charging, the battery charging indicator will be on.
NOTE:
The unit will also charge from indoor light and lamps but at a slower rate.
DYNAMO CHARGING
1. Install Ni-MH batteries correctly.
2. Set the Power Source Selector to "OFF" position.
3. Turning the hand crank, the built-in dynamo will start to generate
electricity. The unit will charge the Ni-MH battery automatically.
4. While charging, the battery charging indicator will be on. The brightness
of LED lights shows the charging intensity of the batter power
NOTE
: While the intensity of the battery power is limited, you can turn the hand crank to generate
electricity for emergency.
COMPUTER USB CHARGING
1. Install the Ni-MH batteries correctly.
2. Set the Power Source Selector to "OFF" position.
3. Use a USB to Mini USB cable (not included), plug one end with USB into
the computer USB port. Plug the other end into Mini USB jack of the unit.
It will start charge the Ni-MH battery automatically when your computer is ON.
4. While charging, the "IN" in front of the unit will be on.
NOTE
: Before the first use, we recommend to charge the Ni-MH batteries for 4 hours the maximum.
Please do not charge the battery longer than recommendation as it will shorten the battery life.
CHARGING THE INTERNAL BATTERY
Power Switch
Top: Solar panel
8