CUBE in-a-box V3.Series Assembly Instructions Manual - Page 5
Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing CUBE in-a-box V3.Series. CUBE in-a-box V3.Series 6 pages.
Print Page
14
15
16
17
18
19
20
- 4 -
Place the raceway cover on
top of the plastic cavaliers
on each side of the frame.
To close the raceway cover,
push down on each side of
the cover until it clips in.
Display and level the 3 work
tops then screw them (you
may use an electric drill).
Use the black wood screws.
Check and assemble the
shelf-supports with the big
chromed-screws.
Slide both supports on the
right and left side of the
high panel of your choice.
Adjust the height of both
right/left shelf-supports.
Display the shelf on top of
the shelf-supports, push
down on the black plastic
brackets until it fits in.
Push the shelf all the way
toward the panel.
Use a leveler to adjust the
shelf-supports height.
Display the book-holders as
per the holes.
Place the metal-caps on top
of each post. Tighten them
with the self tapping
metal-screws.
Place magnet plastic-caps
on top of each post.
Place the grommet-cap on
the work-top hole.