Discovery Telecom Planetarium Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Toy Discovery Telecom Planetarium. Discovery Telecom Planetarium 4 pages.

Print Page

Components

Light Stand

and Motor

Pointer clips

on to back of

Planetarium

Pointer

*Choose position 1 for functions OFF, position 2 for rotation only,

position 3 for sound only and position 4 for rotation and sound.

Using The Planetarium:

1. Fit the globe over the bulb on the

light stand. Place the light stand

on a ﬂat surface, such as a bedside

table.

N.B. For best results (clearer

projection) stand the Planetarium

on a higher surface closer to the

ceiling. Move the unit around to

ﬁnd the best place!

Globe

Light

(on/off)

Rotation and Sound

(on/off)*

2. Your Planetarium comes with one bulb ﬁtted

and one spare. The bulbs are screwed into

the socket, and then a cover is placed over

and screwed (by screwdriver) into place. The

globe then ﬁts by lowering onto the stand

(hole side down). Once the globe is fully

lowered, turn the globe clockwise

to lock it in place.

Your Planetarium is now ready for action!

WARNING!

ADULTS ONLY:

TO REPLACE THE BULB...

(i) For safety, before you replace the bulb,

please turn off the light for at least three

minutes so that it may cool down.

(ii) Open the bulb cover using a Phillips

screwdriver, then remove the old bulb and

replace it with a new 2.4V 500mA bulb.

Replace the bulb cover and secure again

using the screwdriver.

3. Turn the light ON by sliding the light switch

across to the right. The light will then

project the stars onto your walls and ceiling

through the holes in the globe. To see more

clearly, you should keep the room as dark as

possible.

To turn the light OFF, simply slide the switch

back to the left.

4. Position 1 for the function switch is OFF.

Slide the function switch to position 2

make the globe rotate, creating a

planetarium effect. Slide the switch to

position 3

to hear interesting and

educational facts about the planets (which

do not form part of the light show, but are

covered in much more detail in your CD).

Slide the switch to position 4

for

rotation of the star globe AND the

commentary about the planets, (N.B. as

above, planets are not part of the star light

show).

When you want to turn the functions off,

slide the switch back to position 1 (OFF).

Inspired by