3D innovations DeskCycle2 User Manual - Page 8
Browse online or download pdf User Manual for Fitness Equipment 3D innovations DeskCycle2. 3D innovations DeskCycle2 16 pages.
Print Page
There are two numbers on the display; one on the top and one on the bottom. See the image below.
The Top Number always displays your pedal speed. An M on the right side of this number indicates
•
miles per hour. In some countries this will be a K, indicating kilometers per hour.
•
The Bottom Number displays RPM, Distance, Time or Calories.
The Mode Select Button
Press the Mode Select Button to select what
the bottom number displays.
Each time you press the Mode Select Button,
the mode changes between the 5 modes
below:
1. SCAN (RPM, DIST, TIME and CALS)
2. RPM
(Revolutions Per Minute)
3. DIST (Distance)
4. TIME
(Time)
5. CALS
(Estimated Calories)
SCAN Mode
When the Scan Mode Indicator is visible, the
lower number will cycle between displaying
RPM, Distance, Time and Calories. Each will
be displayed for about 5 seconds at a time.
RPM Mode When the RPM Indicator is visible, the bottom number
displays your average pedal speed in Revolutions Per Minute. The
image to the right shows 0 RPM, which means the bike is not being
pedaled. Also note that the Pedaling Indicator is not displayed.
DIST Mode
When the Distance Indicator is visible, the bottom number displays
an estimate of the total distance you've pedaled since the display was
last reset. The image to the right shows 22.2 miles. Note the M in the
picture to the right indicates miles. If your display shows a K, then the
reading would be 22.2 kilometers.
TIME Mode
When the Time Indicator is visible, the bottom number displays the
total time you've used the bike since the display was last reset. The
image to the right shows 95 minutes and 19 seconds.
CALS Mode
When the Calorie Indicator is visible, the bottom number displays an
estimate of the number of calories burned since the display was last
reset. The image to the right shows 536 calories.
How to Reset DISTANCE, Time and Calories
Time, Distance and Calories are accumulated as you pedal. To reset these all to zero, simply press and
hold the Mode Button for about 3 seconds.
How to Turn the Display On and Off
The display automatically turns on when you pedal the bike. You can also turn the display on by
pressing the Mode Button. The display automatically turns off a few minutes after you stop pedaling.
6