3D Nord magicolor 2300W Installation Manual - Page 13

Browse online or download pdf Installation Manual for Printer 3D Nord magicolor 2300W. 3D Nord magicolor 2300W 19 pages.

Print Page

Connect the Interface Cable

$ $ $ $ USB Port
Use a USB 1.1 cable (Type B)
when connecting the USB port
on the printer to the USB port on
your computer.
% % % % Parallel Port
Use a Centronics IEEE 1284
bidirectional parallel cable when
connecting the parallel port on
the printer to the parallel port on
your computer.

Install the Printer Driver

1
In case the Found New Hardware wizard shows up, while connecting
your PC with your printer, cancel it.
! "
Do not use Plug-and-Play or the Windows Add Printer Wizard. You
must use the CD-ROM Installer in order to correctly install all neces-
sary printer drivers and utilities.
2
Insert the magicolor2300W Documentation & Utilities CD-ROM in the
CD-ROM drive of your PC.
3
The CD-ROM Installer automatically starts; otherwise, browse with the
Windows Explorer to the CD-ROM and double-click on setup.exe.
4
Follow the instructions on the screen to install the magicolor2300W
printer driver and utilities.
5
When the driver and utilities are installed, remove the CD-ROM from
your CD-ROM drive and store it in a safe place.
Connect the Interface Cable
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
9