CubuSynth Engine Build Manual - Page 11

Browse online or download pdf Build Manual for Music Equipment CubuSynth Engine. CubuSynth Engine 20 pages. Dual complex vco with wave shaping and modulation features

Print Page
CubuSynth Engine - Build Guide
STEP 9 (Main PCB)
Pin headers
Turn around the board and place the Pin Headers for Power and the Expander like shown below.
Orientation of the 16 Pin Power Header is very important to be able to insert the power cable
the correct way.
Put some tape, to hold them in place while soldering from the other side.
1
Eurorack Power 16 Pin IDC
1
HDR-M-2.54_2x5
STEP 10 (Main PCB)
Electrolytic capacitors
Place the 3 47uf capacitors as shown below. The white line on the capacitor has to face down
towards the white mark on the PCB. The longer leg of the capacitor goes through the hole
marked with "+"
3
47u
Page 11
U5
H3
C43,C4,C3
PCB V1.1 May 2022