AERF WIRELESSBAND 1.0 Instruction Manual - Page 2
Browse online or download pdf Instruction Manual for Conference System AERF WIRELESSBAND 1.0. AERF WIRELESSBAND 1.0 2 pages.
Print Page
EN
4. START-UP
1 2
+
+
+
12/24V
2. CONNECT RECEIVER
1. INSERT BATTERIES
M
>1m
RECEIVER
TRANSMITTER
6. MINIMUM DISTANCE
7. INSTALL AND WIRE
1 m.
RECEIVER
5. PROGRAMMING PROCESS
CODE MEMORIZATION
1.5s
PROG.
PRESS
1 X BEEP
RECEIVER
MEMORY RESET
1.5s
PROG.
1 X BEEP
PRESS
RECEIVER
MEMORY FULL INDICATOR
Several beeps for 10 seconds when trying to memorize a new transmitter.
LOW BATTERY INDICATOR
4 beeps each time a message is received from a programmed transmitter. Both, warning LED and buzzer are activated simultaneously.
TECHNICAL SPECIFICATIONS
Receiver suply voltatge
Transmitter suply voltatge
Battery life
Receiver memory
Receiver Output
Receiver Power consumption
Ball pressure test (IEC 695-10-2)
Pollution degree
Protection class (IEC 60529)
Frecuency Channels
Range
Working temperature
Software
Rated transient over voltage
Transmitter power consumption
Machine Security Normative
Reaction time
CE DECLARATION OF CONFORMITY
For more information visit the website www.aerf.eu
WIRELESSBAND 1.0
-
+
0V
AC/DC
3. CHECK OPTION
POWER SUPPLY
SELECTORS
220V
CONTROL
UNIT
8. TURN ON POWER
SUPPLY
PROG.
RELEASE
PRESS
TRANSMITTER
BUTTON
3s
PROG.
KEEP IT
PRESSED
12/24 AC/DC
2x lithium battery 3V DC type CR2032
2 years
14 transmitters
Relay,micro disconnection 1B
0.5 W - 12 V / 1,2 W - 24 V
PCB (125ºC) WRAP (75ºC)
2
Ip55
868.95MHz & 869.85MHz
100m
-35ºC to +55ºC
Class A
330V
Transmitting 17mA / stand by 16uA
13849-2008 PL-C Category 2, with TEST
60 ms
4. CARRY OUT CODE
MEMORIZATION (POINT 4.)
12/24V
OK?
ON
OK?
9. TEST SAFETY EDGE
ON DOOR
10s
1 X BEEP
WAIT
# BEEPS
RELEASE
WARNING!!
- Installation, start-up, modification and updating of the
system may only be carried out by a qualified person.
-
Switch off the operating voltage before working on the system.
- The system doesn't have fuse protection. It is
recommended to include exterior protection from 100mA
and to 250mA.
- In case of any hypothetical issue, please do a memory
reset (point 4.).
PROG.
5. INSTALL AND WIRE
TRANSMITTER ON DOOR
2 X BEEP
SAVE & EXIT
10s
PROG.
2 X BEEP
WAIT
SAVE & EXIT
2 - 2