Dish TV DVB-S6800PLUS Operation Manual - Page 12

Browse online or download pdf Operation Manual for Satellite TV System Dish TV DVB-S6800PLUS. Dish TV DVB-S6800PLUS 20 pages. Digital satellite receiver

Print Page

1. Remote Control

Punch the green key to

reveal the interface Organize Bouquet:

Punch the red key to enter the interface Manual

Search:

respectively,

highlight

the

instruction

Frequency or Symbol Rate, punch the digit-keys to

modify the value of parameter. In turn, highlight the

instruction Polarization, FEC or Program Type,

punch the </> key to adjust the state; Punch the blue

key to save the modification; Punch the green key to

add the new one transponder. Return to the interface

Organize Bouquet

Punch the green key to add the new one transponder;

punch the yellow key to move the highlighting

transponder; punch the blue key

and the

key to remove. Return the interface to the

CH Search Menu

Put the cursor onto the instruction Search , punch the </>

key to choose one the instruction: Blind Scan, i.e. the

blind-scanning or the mindless-scanning, to commence

the action by punching the OK key on the Blind Scan

status (whichever the satellite you are using, as long as

the satellite is effective, the channel (service) in the

satellite can be scanned and stored); Network, to start

the action by punching the OK key on the Network

status;

Transponder

, to scan the channel (service) on

the present transponder by punching the OK key on the

Transponder status; Advanced

, to scan the channel

by the more particular manner, enter the interface

Advanced Search by punching the OK key on the

Advanced status (details: respectively, highlight the

instruction Polarization or FEC, punch the </> key to

choose the item; in turn, highlight the instruction

Frequency, Symbol Rate, Video PID, Audio PID),

punch the OK key to begin the scanning. The AUTO

is to scan the satellite automaticly based on the preset.

After scanning, the system will inquire you whether to

save the scanned channel, punch the OK key to save.

Return the interface to the Installation