Arrakis Systems ARC-HP Manual - Page 2

Browse online or download pdf Manual for DJ Equipment Arrakis Systems ARC-HP. Arrakis Systems ARC-HP 4 pages.

Print Page

Thank you for your purchase of the ARC-HP. The ARC-HP is designed for two purposes:

1) ADDITIONAL HEADPHONE OUTPUTS - To provide additional headphone outputs for your console.

You may use one or more units 'daisy chained' and have multiple headphone outputs.

2) LOGIC & AUDIO INTERFACE – The ARC-HP has two buttons, Talkback and Cough. These buttons,

along with other logic allow you to interface to your console.

HEADPHONE SETUP INSTRUCTIONS

STEP 1 – Connect the Main Studio console audio output (such as Program, or Monitor output) to the

audio Main input on the ARC-HP. The Main input is a balanced input that uses pins 1, 2, 3, and 6.

MAIN PORT PINOUT

1 - PGM L+

2 - PGM L-

3 - PGM R+

4 - GND

5 - TB (Control) Pulling to Ground triggers TB relay

6 - PGM R-

7 - TB Audio In +

8 - TB Audio In -

STEP 2 (OPTIONAL) – Connect the Main Studio Talkback

audio output to Pins 7 & 8 on the ARC-HP Main input.

For example, the ARC-10 series boards have a DB15

connection, and Talkback audio fed from Mic's 1 & 2 are

fed from the DB15 pin 12 (check ARC-10 manual for

current information).

This allows the Main studio to Talk to the user on the ARC-HP.

STEP 3 (OPTIONAL) - Connect the ARC-HP Main input, pin 5, to the Main Studio's console logic. When

pin 5 on the ARC-HP is pulled to ground, it will:

(A) duck the PGM audio on the ARC-HP, and

(B) play the TB Audio from the Main studio.