Displays2go RPFIRESFTY Assembly Instructions
Browse online or download pdf Assembly Instructions for Display Case Displays2go RPFIRESFTY. Displays2go RPFIRESFTY 2 pages. Wall mounted fire safety station
Print Page
RPFIRESFTY – Wall Mounted Fire Safety
Thread standoffs through all 6 holes along edges. Thread bolts through any
holes in the body and attach nuts to back side.
Attach both sign holders to the top of the body panel by sliding both key
holes down onto the bolt. Tighten the nut on the back.
3
Attach bottom pocket by pinching in both sides of the pocket and pressing
into the holes in the back plate. Press down and click the pocket into place.
Drop dividers down into slots inside of the pocket.
Station
1
V21.06
Fire Safety Panel (1)
Standoff (6)
Nuts and Bolts (3)
8.5" x 11" Sign Holder (1)
11" x 17" Sign Holder (1)