Distech Controls MS2 Series Hardware Installation Manual - Page 5

Browse online or download pdf Hardware Installation Manual for Security Sensors Distech Controls MS2 Series. Distech Controls MS2 Series 5 pages. Mini infrared multi-sensor

Print Page

Light measurement

Once the MS2 is installed, a Lux level measure correction can be required (using a Luxmeter).

This correction applies a coefficient to compensate for any disturbance and the general layout of the room (room and furniture color,

partitions of open office areas, etc.).

For more information please refer to the lighting controller's user guide.

Sight range

Infrared technology:

Sight range depends on remote control positioning, orientation and on potential disturbances (sunlight, light...).

TCND-I installed about 1m50 from the floor

& MS2-I about 2m50 from the floor

45°

1,8m

TCND-I

Distech Controls and the Distech Controls logo are trademarks of Distech Controls Inc.; L

Framework is a registered trademark of Tridium, Inc. ; ARM Cortex is a registered trademark of ARM Limited ; BACnet is a registered trademark of ASHRAE ; BTL is a

registered trademark of the BACnet Manufacturers Association; Windows, Visual Basic.Net are registered trademarks of Microsoft Corporation. EnOcean is a registered

5/5

6,5m

45°

1,8m

Specifications subject to change without notice.

trademark of EnOcean GmbH. All other trademarks are property of their respective owner.

Angle (°)

Sight range (m)

is a registered trademark of Echelon Corporation; Niagara

ORKS

MS2 Series

1.80

Undisturbed direct

Disturbed direct

sight range

MS2 Series_IG_12_EN

6.50