CAME 8K01MB-0572 STYLO KIT Quick Setup Manual - Page 5

Browse online or download pdf Quick Setup Manual for Garage Door Opener CAME 8K01MB-0572 STYLO KIT. CAME 8K01MB-0572 STYLO KIT 12 pages. Complete kit for a single swing gate weighing up to 100kg per leaf / max. width 1.8m

Print Page

stylo-BS:

Preliminary checks

1. Check that the gate structure is sturdy enough, the hinges work efficiently and that there is

no friction between the fixed and moving parts

2. Make sure that measurement

3. Make sure that you have fitted opening and closing mechanical gate stops

Side hung gate GEOMETRY:

Opening

A (mm)

90°

130

120°

170

•

The greater the motor angle, the greater the opening speed

and the slower the gear motor's thrust.

•

The smaller the motor angle, the slower the opening speed

and the greater the gear motor's thrust.

Remove the lower cap

from the gearmotor

GEOMETRY

does not exceed the value shown in the reference table

C (mm)

0 ÷ 180

180

Ø 3,5 x 9,5

Secure the gearmotor to

the flange using the four

bolts supplied

Secure the upper cap

STYLO-ME / STYLO-BS

D (mm)

450

UNI 6593 Ø 6x18

UNI 5739 Ø 6x10

Securing the transmission arm

1. Assemble the hinged arm by joining the two half-arms

with nuts and bolts. Lubricate the rotation pins (1).

2. Insert the hinged arm onto the gearmotor shaft and

secure it using the screw and washer (2).

3. Release the gearmotor, open the gate leaf and hook

the arm using the nuts and bolts (3).

4. Cover the hole using the cap (4).

with 90° opening

OUTward OPENING gates

For outward opening gate geometry

please refer to the full Installation Manual.

Ø 10x39

O-Ring 4100

UNI 6593

Ø 6x18

Tick

= 300 mm max

UNI 5739 Ø 10x14

UNI 6592

Ø 12x24

UNI 5739

M6x10