CAME A 5024 N Installation Manual - Page 7

Browse online or download pdf Installation Manual for Garage Door Opener CAME A 5024 N. CAME A 5024 N 13 pages. Ati series
Also for CAME A 5024 N: Installation Manual (13 pages)

Print Page

Release the gearmotor and swing the gate-leaf to the fully open position you desire, then, unscrew the securing screws on the opening

stop micro-switches assembly.

Slide the micro-switch assembly along the micro-switch bar until it is inserted by contact on the micro-switch activating sled

Secure the micro-switch assembly using the respective screws.

Swing the gate until fully closed.

Unscrew the securing screws on the closing decelaration micro-switch assembly.

Slide the micro-switch assembly along the micro-switch bar until it is completely passing the contact point on the micro-switch activating

sled (as shown in part A.)

Secure the micro-switch assembly using the respective screws.

Part. A.

Micro-switch

insertion area

Release the gearmotor and swing the gate-leaf to the fully open position you desire, then, unscrew the securing screws on the opening stop micro-

switches assembly.

Slide the micro-switch assembly along the micro-switch bar until it is completely passing the contact point on the micro-switch activating sled (as

shown in part B.).

Secure the micro-switch assembly using the respective screws.

Part. B.

OPENING PHASE: (stop)

CLOSING PHASE (deceleration)

OPENING PHASE (deceleration if set up on the control panel):

Excluding the micro-switch

contact (fully closed gate-

leaf)

Excluding the micro-switch

contact (fully open gate-leaf)

Deceleration

micro-switch

insertion area